Product category:
Liquid Analysis: DO, Ozone, BOD, TOC
News Release from: Palintest | Subject: Multi-tube heater block
Edited by the Processingtalk Editorial
Team on 29 September 2005
New economical heater block for COD
testing
Water analysis specialist Palintest has introduced a new, high capability, multi-tube heater block, ideal for chemical oxygen demand (COD) reactions and testing
Water analysis specialist Palintest has introduced a new, high capability, multi-tube heater block The block is ideal for chemical oxygen demand (COD) reactions and enables Palintest to offer economical COD test kits for use with its Tubetest system
This article was originally published on Processingtalk on 7 May 2003 at 8.00am (UK)
Related stories
Molybdate meter makes tests fast and easy
Palintest has developed a new meter for the accurate testing of the molybdate formulations used as corrosion inhibitors in industrial water treatment
Fast dissolving Phenol red tablets for Photometer
Palintest has produced a new rapid clear formulation of their phenol red tablet for accurately measuring pH using a photometer system
These include heater block, test tube rack, photometer adaptor and micropipettor.
The heater block is a microprocessor controlled incubator with a dual LED display.
Its multi-tube block offers significant advantages in space saving and power consumption over the traditional method.
Temperature is settable from 30C to 200C with timer control.
It offers rapid heat up rate within 15 minutes from ambient to 100C, and features stability, uniformity and accuracy of +/- 1C.
The Palintest Tubetest system offers a simple, quick, and convenient method of testing COD which conforms to the ISO standard on sealed-tube COD testing (BS ISO 15705:2002).
A sample is added to a Tubetest tube, it is digested for two hours at 150C, cooled and the test colour measured using a Palintest photometer.
The COD test is vital for assessing the quality of effluents and wastewater prior to discharge.
The liquid reagents are supplied pre-measured in labelled, disposable test tubes, and the Palintest Photometer 8000 provides instant test recognition and reading, for accurate results.
COD is probably the most widely tested parameter in pollution control.
The test is used by a wide range of industrial plants, food and beverage companies, and contract labs.
• Palintest: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
