Product category:
Valve positioners and actuators
News Release from: Parker Hannifin - Electromechanical and Drives Division | Subject: ETV Actuators
Edited by the Processingtalk Editorial
Team on 08 June 2007
New electric cylinder with enhanced
performance
Superior ballscrew and special thrust bearings with lubrication point increases the potential capabilities for the Parker Electromechanical ETV actuators
A new addition to the Parker Electromechanical ET ElectroThrust range of linear actuators offers enhanced performance and an extended working life The new ETV100 is derived from the proven ET100 electric cylinder and utilises the same basic design in combination with higher performance key components
This article was originally published on Processingtalk on 21 May 2007 at 8.00am (UK)
Related stories
Increased versatility for digital servo drives
Parker Electromechanical have enhanced their highly successful Aries family of low-cost, all-digital servo drives with the addition of resolver feedback support
Actuators move loads at high speeds with precision
The latest HPLA Linear Actuator from Parker Electromechanical is designed to provide precision positioning (0.05mm) of heavy loads (1.6 tonnes) at high speed (5m/second)
The superior performance of the new ETV actuator is accomplished through the use of a high quality C7 ballscrew, with a 6-circuit nut instead of a 3-circuit one.
Further changes include the integration of taper roller bearings and the addition of a bearing lubrication point.
While the upgraded ballscrew provides the benefit of double the static and dynamic capacity, the taper roller bearings provide an increase of load capacity of three times when compared to the original angular contact bearings.
The ETV100 offers thrusts in excess of 21kN, stroke lengths of up 1500mm and +/-0.07mm repeatability.
With a ballscrew diameter of 40mm, two pitch options of 5mm and 10mm are offered, permitting linear speeds of up to 340mm/second.
Like the other actuators in the ElectroThrust range, the ETV100 is available in both direct and belt-driven parallel drive configurations and features the same standard options for rod-end configuration and cylinder mounting.
An IP65 rated version is also available, suitable for use in wash down, external and contaminated environments.
Together these enhancements both expand the scope of applications open to the ElectroThrust range as well as extending the actuator working life in applications previously satisfied by the existing ET100 actuators.
Typical applications include materials handling and feed duties, testing equipment, pick-and-place tasks, as well as valve/flap actuation.
With the IP65 option the ETV100 is also ideally suited for use in food and beverage applications where system wash down is a prerequisite. Request a free brochure from Parker Hannifin - Electromechanical and Drives Division ...
• Parker Hannifin - Electromechanical and Drives Division: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
