Product category:
Valves and manifolds
News Release from: Parker Instrumentation | Subject: 2-instrument double-block-and-bleed manifold
Edited by the Processingtalk Editorial
Team on 06 May 2004
Manifold slashes weight on topside
instruments
A novel new type of manifold developed by Parker Instrumentation is helping to save a large amount of weight and space on the BHP Billiton Petroleum Angostura offshore platforms
A novel new type of manifold developed by Parker Instrumentation is helping to save a large amount of weight and space on the BHP Billiton Petroleum Angostura offshore platforms The design re-engineers the 'monoflange' double-block-and-bleed manifold concept to accommodate two instrument connections instead of one
This article was originally published on Processingtalk on 18 Aug 2008 at 8.00am (UK)
Related stories
Phastite connectors ease test line construction
The innovative new fluid connector, Phastite, has simplified the construction of a state-of-the-art facility for testing dry gas compressor seals at the new John Crane turbomachinery facility
New 20K ball and needle valves
Parker Instrumentation has launched NACE-compliant ball and needle instrumentation valves optimised for high pressure hydraulics and fluid control applications operating at up to 20,000 PSI/1379 bar
From a single flange interface to the piping or processing vessel, the new manifold provides connections for both a local visual gauge and an electronic transmitter that connects to the remote control room - each with their own double-block-and-bleed isolation valves.
This approach substantially reduces the weight and space of oil and gas process instrumentation on the platforms.
Parker's twin-monoflange manifold was developed to combat the severe space and weight restrictions on satellite wellhead platforms, following a suggestion from the facilities engineering contractor for the BHP Billiton Angostura development, Technip Offshore Engineering of Houston.
Further reading
PED-certified pressure relief valve
Parker Instrumentation has developed a PED-certified, proportional relief valve for process instrumentation applications, with the ability to provide protection over an extremely broad pressure range
Quality of lowest cost 'economy' tube fittings
Globalisation has led to significant new competition from low-cost producers in high volume product categories that can be copied easily: industrial tube fittings are no exception
High-pressure push-fit connections in larger sizes
Parker Instrumentation has extended the application potential of its unique 'push-fit' fluid connectors for high-pressure industrial applications, up to 25mm or 1 inch at 20kpsi
Technip would normally have specified a double-block-and-bleed arrangement using discrete valves and interconnections to meet the project technical requirements.
Conventionally, such a construction would have started with a double expanding gate valve for primary isolation - a component costing several thousand dollars alone for the pressure class in this application.
Parker's new component integrates all the discrete valves and tube fittings for process pipe to two instruments into a single assembly.
This reduces the height of the instrumentation by at least 80%, making it much easier for Technip to meet the access requirements of the platform's human-factor engineering specification.
Numerous other benefits include an estimated weight saving of some 70%, a major reduction in the number of connections and potential leak paths, and a significant cost saving.
Parker's complete twin-monoflange assembly costs less than the double-expanding gate valve alone, for example.
On other parts of the offshore instrumentation system - particularly when connecting to pressurised vessels such as the platform's vapour recovery units - the benefits are even more significant.
Here, the twin-monoflange dramatically reduces the size of the support fabrications that are used to mount the external instrumentation - saving very significant amounts of weight and space and greatly reducing the impact of vibration.
With around 50 pairs of instruments on every one of Angostura's three wellhead platforms, the combined savings from installing the new Parker manifold runs to an estimated 4000 kilograms, plus hundreds of man-hours of assembly time.
Every manifold also eliminates interface connections, boosting reliability, and saves component costs.
"Every square inch and pound of weight cut from the topside equipment budget makes a major contribution to the overall cost-effectiveness and safety of offshore platforms", says Brian Ahlefeld, senior instrumentation technician for Technip Offshore Engineering.
"I suggested there was scope to make some savings in this area, and within two days of discussing it with Parker Instrumentation, their development team in Barnstaple provided me with a drawing of an elegant solution".
"We've managed to squeeze two instrument connections and block-and-bleed valves into exactly the same space as a traditional monoflange", adds Kevin Burke of Parker Instrumentation.
"This design has implications for all areas of industry, but the benefits for offshore installations are particularly great, making a major contribution the cost reduction goals that are at the heart of all new projects".
"Compared with double-block-and-bleed connections built using two monoflanges the savings are around 50% of space and weight.
Compared with a system based on discrete valves and fittings, the savings are much greater", he adds.
• Parker Instrumentation: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
