Latest news on Processingtalk categorised by supplier
QuickSilver Controls
Please note: More news from QuickSilver Controls on the Engineeringtalk web site
Address:
Suite E 580 E Arrow Highway
San Dimas
CA 91773
USA
Telephone: (USA) +1 888 660 3801
http://www.quicksilvercontrols.com
Our RSS feed for news from QuickSilver Controls
Request to receive our free email newsletter each week
Listing of all 15 news releases from QuickSilver Controls:
Servo motor controller with DMX512
QuickSilver Controls has added the DMX512 serial protocol to its SilverDust line of servo motor controllers
News from QuickSilver Controls ( 7 January 2008)
Expanded line of servo motors
QuickSilver Controls expands its current line of servo motors with the QCI-A23K-3, a 145 oz-in (1Nm) NEMA 23 Frame Servo Motor
News from QuickSilver Controls (17 August 2007)
OEM servo motor controller/driver system for US795
For OEMs, or people who need a powerful servo motor controller/driver in a small place, the popular QuickSilver Controls SilverDust servo controller/driver has a user mountable, board only option
News from QuickSilver Controls (24 July 2007)
Servo controlled rotary knife application
User application article The QuickSilver Controls SilverDust servo controller/driver is now capable of doing rotary knife applications, widely used to cut, seal or perforate material moving along a conveyor
News from QuickSilver Controls (18 May 2007)
Linear Servomotor from a Linear Step Motor
QuickSilver Controls, known for its ability to servo rotary microstep motors now extends these capabilities to include servoing linear step motors
News from QuickSilver Controls (12 January 2007)
Servo controller includes Ethernet and CAN
QuickSilver Controls has responded to the demands of industry for low cost network support with its newest single axis controller/driver
News from QuickSilver Controls (30 November 2006)
CANbus added to servo motion controller/driver
QuickSilver Controls adds CANbus to its SilverDust IGB servo motion controller/driver for servo control of NEMA 17 and 23 frame stepmotors
News from QuickSilver Controls ( 3 May 2006)
Right Angle Motor Cable Adapters
For those applications where you need to squeeze a NEMA 17 or NEMA 23 motor into a tight spot, QuickSilver Controls now offers adapters for its 15 pin D shell motor connector
News from QuickSilver Controls (19 January 2006)
Limit switch added to servo controller
QuickSilver Controls adds a programmable limit switch output to its SilverDust controller/driver for servo control of NEMA 17 and 23 frame microstep motors
News from QuickSilver Controls (18 November 2005)
Open loop operation added to servo controller
To make putting together open loop systems easier, QCI now sells its stepmotors and cabling for open loop operation
News from QuickSilver Controls (12 September 2005)
Servo control of NEMA 34 IP65 stepmotors
QuickSilver Controls, know for its ability to servo microstep motors, now offers NEMA 34 IP65 stepmotors with encoders for wash down applications
News from QuickSilver Controls ( 1 August 2005)
Servo controller/driver for Microstep motors
QuickSilver Controls, known for its ability to servo Microstep motors, releases its most feature rich single axis controller/driver yet
News from QuickSilver Controls (27 June 2005)
IP65 motor/encoders available from QuickSilver
QuickSilver Controls, fills the industry need for a wash down servo system with its new line of NEMA 23 IP65 motor/encoders, which exceed the IP65 protection standard
News from QuickSilver Controls (12 April 2005)
New QuickSilver 380in-oz 23 frame motor
QuickSilver Controls adds the 23T-7 motor/encoder to its line: the NEMA 23 frame motor generates 380 in-oz of torque and comes with an 8000 count/rev encoder
News from QuickSilver Controls ( 7 March 2005)
QuickSilver SilverNugget I-Grade motor control
QuickSilver provides servo control of a 17 or 23 frame micro step motor utilising a single cable for both motor and encoder signals, with the SilverNugget I-Grade controller/driver
News from QuickSilver Controls ( 3 November 2004)
