http://www.processingtalk.com/news/qck/qck000.html QuickSilver Controls news releases on Processingtalk en-gb Copyright (C)2008 Pro-Talk Ltd. All rights reserved. Fri, 21 Nov 2008 08:00:00 UT Fri, 21 Nov 2008 08:00:00 UT http://www.pro-talk.com/images/protalklogo90.gif http://www.pro-talk.com/ 90 79 QuickSilver Controls has added the DMX512 serial protocol to its SilverDust line of servo motor controllers Mon, 07 Jan 2008 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck114.html QuickSilver Controls expands its current line of servo motors with the QCI-A23K-3, a 145 oz-in (1Nm) NEMA 23 Frame Servo Motor Fri, 17 Aug 2007 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck113.html For OEMs, or people who need a powerful servo motor controller/driver in a small place, the popular QuickSilver Controls SilverDust servo controller/driver has a user mountable, board only option Tue, 24 Jul 2007 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck112.html The QuickSilver Controls SilverDust servo controller/driver is now capable of doing rotary knife applications, widely used to cut, seal or perforate material moving along a conveyor Fri, 18 May 2007 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck111.html QuickSilver Controls, known for its ability to servo rotary microstep motors now extends these capabilities to include servoing linear step motors Fri, 12 Jan 2007 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck110.html QuickSilver Controls has responded to the demands of industry for low cost network support with its newest single axis controller/driver Thu, 30 Nov 2006 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck109.html QuickSilver Controls adds CANbus to its SilverDust IGB servo motion controller/driver for servo control of NEMA 17 and 23 frame stepmotors Wed, 03 May 2006 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck108.html For those applications where you need to squeeze a NEMA 17 or NEMA 23 motor into a tight spot, QuickSilver Controls now offers adapters for its 15 pin D shell motor connector Thu, 19 Jan 2006 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck107.html QuickSilver Controls adds a programmable limit switch output to its SilverDust controller/driver for servo control of NEMA 17 and 23 frame microstep motors Fri, 18 Nov 2005 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck106.html To make putting together open loop systems easier, QCI now sells its stepmotors and cabling for open loop operation Mon, 12 Sep 2005 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck105.html QuickSilver Controls, know for its ability to servo microstep motors, now offers NEMA 34 IP65 stepmotors with encoders for wash down applications Mon, 01 Aug 2005 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck104.html QuickSilver Controls, known for its ability to servo Microstep motors, releases its most feature rich single axis controller/driver yet Mon, 27 Jun 2005 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck103.html QuickSilver Controls, fills the industry need for a wash down servo system with its new line of NEMA 23 IP65 motor/encoders, which exceed the IP65 protection standard Tue, 12 Apr 2005 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck102.html QuickSilver Controls adds the 23T-7 motor/encoder to its line: the NEMA 23 frame motor generates 380 in-oz of torque and comes with an 8000 count/rev encoder Mon, 07 Mar 2005 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck101.html QuickSilver provides servo control of a 17 or 23 frame micro step motor utilising a single cable for both motor and encoder signals, with the SilverNugget I-Grade controller/driver Wed, 03 Nov 2004 08:00:00 UT QuickSilver Controls http://www.processingtalk.com/news/qck/qck100.html