Product category:
Temperature measurement: IR techniques
News Release from: QHi Group | Subject: ExerTherm
Edited by the Processingtalk Editorial
Team on 13 September 2005
Continuous predictive maintenance of
critical risk
Temperature is one of the best indicators of a fault or malfunction in virtually all electrical or mechanical equipment: now monitor your plant from within protective enclosures, for temperature shift
Temperature is one of the best indicators of a fault or malfunction in virtually all electrical or mechanical equipment However, key electrical switchgear has proved very difficult to monitor, being inaccessible within metal enclosures
This article was originally published on Processingtalk on 8 May 2007 at 8.00am (UK)
Related stories
Continuous thermal monitoring eliminates downtime
Now high-downtime-cost organisations can continuously thermally monitor their mission critical electrical power and mechanical assets such as bearings, pumps, gearboxes, compressors and motors
Exertherm continuous thermal monitoring system
In an industry first, the QHi Group will now supply their Exertherm continuous thermal monitoring system with Lifetime Calibration and a Lifetime Warranty, stressing the monitoring reliability offered
Over the last decade, the accepted preventative method of reducing the risk of key electrical switchgear failure, has been periodic thermal imaging, but it is not the ideal solution.
Firstly, thermal imaging inspections are normally only periodic, (typically once or twice per year), due to the high costs/time involved.
Secondly, thermal imaging is carried out externally to the switchgear enclosure, thus only components immediately adjacent to the external panel can be inspected.
Further reading
SIZE MATTERS!! Small non-contact infrared sensor
IRt/c units are small, accurate, non-contact infrared sensors, which require no outside power and connect directly to temperature measurement and control instrumentation
Super reliability - sensors have MTBF of 1000yr+
QHi-Infrared, one of the UK's leading specialists in infrared technology, can help you bring the accuracy and control of non-contact infrared thermocouples into the tightest of spaces
Thermal "windows" improve the situation, but still require direct line of sight to the target.
The answer is to have a predictive system, actually INSIDE, directly and continuously monitoring all key components.
ExerTherm is a unique system, based on patented, small, low cost, plastic bodied, non-contact, infrared sensors, which require no external power source, so allowing the sensor to be placed INSIDE the enclosure, to continuously monitor any component, irrespective of location.
Because the non contact infrared sensors require no power, (just like a normal contact thermocouple), they do not require an amplifier.
As a result they have lifetime calibration.
All other IR sensors require power, requiring panels to be opened regularly and sensors accessed for re-calibration.
ExerTherm sensors also have unsurpassed reliability, with over 1,000yr MTBF, and require no maintenance.
Put all these features together, and it means a true "fit and forget" product.
Though originally designed to monitor electrical switchgear, virtually all key plant (anything which increases or decreases in heat as a symptom of fault or malfunction), can also be continually monitored.
Sensors are linked back via data acquisition cards to a PC or server, to provide on-going trend analysis, graphs and reports.
Further protection is provided via 2 separate alarm levels per sensor (warning and alarm), which automatically activate in the event of pre-set temperature levels being exceeded.
Other key features of the ExerTherm system include: suitable for new, retro-fit/expansion, easy and inexpensive integration with over 400 BMS/bus protocols, available via LAN, WAN, internet, intranet etc.
This new technology which provides the next significant step forward in reducing the risk of major failures in critical power or plant equipment, has already been successfully installed with many major blue chip organisations in, financial services, media, telecommunications, computer data centres, shipping, and large-scale manufacturing.
• QHi Group: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
