Product category:
Telemetry, data acquisition + loggers
News Release from: Radio Data Technology | Subject: Landfill leachate
Edited by the Processingtalk Editorial
Team on 23 May 2005
Radio Telemetry helps landfill effluent
treatment
Monitoring leachate around a landfill site using radio data telemetry controls pumping cycles and scheduling into the process tanks
Leachate is the liquid that collects in the impermeable membrane lining a landfill site as a result of rain percolating down through the buried waste material This water is polluted by the results of waste decomposition and must be treated before it can be discharged from the site
This article was originally published on Processingtalk on 10 Jul 2003 at 8.00am (UK)
Related stories
Profibus by radio controls sewage pumping stations
United Utilities in the North West of England, have adopted Profibus over a radio telemetry link for the control systems on their waste water treatment works at Soutergate in Cumbria
Wessex Water keep nitrate levels under control
Nitrate monitoring equipment is being used by Wessex Water to monitor and regulate the level of nitrates in drinking water to ensure that all water into supply remains within the prescribed standard
Leachate treatment must be optimised to ensure efficient operation of the plant and that discharge consents are not breached.
The better the control over the 'raw material' (the leachate), the easier it is to optimise the treatment process.
The strength of leachate from different cells in a site will depend on many factors including the content, its age and water ingress.
Further reading
New ABB recorders chosen for power station upgrade
ABB Limited has supplied 24 InformIT SM series videographic data recorders, including 20 of the ABB new large-screen SM3000 units, to Ferrybridge C power station as part of a control room upgrade
Triple benefits of electronic data recorder
Metallic pigment and coatings manufacturer Wolstenholme International has scored a hat-trick of benefits with the installation of an ABB InformIT SM3000 multipoint recorder at its site in Lancashire
However the cells of a site are spread over a wide area that is hostile to conventional monitoring methods.
Cables break as waste settles and they are vulnerable to damage by the movement of heavy plant.
Manual data collection and control is slow, labour intensive and potentially hazardous.
These problems were faced by Vinod Mehroke, operations manager for Brett Waste Management at their site near Canterbury so he decided to use an automated system with PLCs at monitoring and control points around the site communicating by radio with a SCADA system at the treatment works.
The layout of the site was not too 'radio friendly'.
The Leachate treatment works is low at one side of the site and the required monitoring points could be anywhere on site, often at other low points behind substantial amounts of clay and waste.
To tackle this the radio unit at the treatment works communicates with a relay station placed on a high point located centrally on the main part of the site.
This provides reliable communications to all parts of the site.
(currently 12 points).
In a 30 second cycle time the system contacts every remote point gathering data and setting a pumping time for those pumps that are required to run.
Using the control system the operator can control the pumping flow from each of the pumps situated around the site.
The control system allows the operator to blend the various leachates into a balance tank for final processing.
The system has been operating around two years and has been expanded during that time.
Brett say that similar systems will be considered for future sites.
The automation system was designed and supplied by Phoenix Electrical Engineering and the Radio Equipment was supplied by Radio Data Technology (RDT) of Witham, Essex.
• Radio Data Technology: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
