Product category:
Conferences and Seminars relevant to Processing
News Release from: Smithers Rapra | Subject: Rapra 2006 Foam Conference
Edited by the Processingtalk Editorial
Team on 30 May 2006
Report on Rapra 2006 Foam Conference
Foaming plastics is a developing art, with new types of biodegradable materials, and increasing regulations on the gases used to blow the foam: the conference gave many expert presentations
Foaming plastics is a developing art, with new types of biodegradable materials to work with and increasing regulations on the gases used to blow the foam Researchers gave expert presentations on the latest technology at the 8th Rapra conference on Blowing Agents and Foaming Processes 2006 (16-17 May, Munich, Germany) which had a record number of delegates from across the world
This article was originally published on Processingtalk on 12 Feb 2004 at 8.00am (UK)
Related stories
Courses for the medical supply industries
Rapra Technology custom-made courses for the medical supply industries to help industry professionals address the technical and materials consequences of new and forthcoming product legislation
Rapra urges polymer sector on research initiatives
The team at Rapra Technology, Europe's leading polymer research house, is urging polymer-based companies to come forward with research proposals that will interest and excite EU fund managers
Clariant described new masterbatch chemical blowing agent technology incorporating a new melt stabilising additive, CESA Extend.
Lehmann and Voss presented data on foam extrusion and ways of controlling foam structure and the thickness of outer foam layers.
Expancel have expandable microsphere technology.
Further reading
Rapra's testing role in plastic and rubber
Testing of plastic and rubber materials and products at Rapra has always highlighted the leading edge for a number of user sectors such as healthcare, automotive, food, chemicals and others
Speedy access to the world's polymer news
Polymer Contents is a new free service from Rapra Technology, custom-created to the needs of individual subscribers and designed to bring the world of polymers direct to the doorstep of the industry.
Still time to become a six sigma "black belt"
Rapra Technology still has a few places left on its Six Sigma Black Belt programme, running from 7th to 10th September.
There were several papers on polyurethane blowing agents such as the physical, liquid blowing agent Ecomate from Foam Supplies, methylal from Lambiotte and Cie, and HFC from Solvay Fluor .
Cracow University of Technology has been working on blowing PU foams using microwave irradiation.
Polylactic acid can be difficult to foam.
The National Research Council of Canada has investigated the continuous extrusion foaming of PLA using a carbon dioxide blowing agent.
There was a very narrow processing window: lower than 7 wt% did not give low density foams and above 8.3 wt% led to severe shrinking on ageing.
Salvatore Innace presented a very interesting paper on foaming polycaprolactone, trying different nucleating agents from talc to nanocomposites.
Noreen Thomas gave an excellent overview of cellular PVC-U and the use of formulation technology such as acrylic processing aids, to improve melt extensibility and strength.
Sekisui Alveo described work on non-PO foams, such as PEEK, PA6, PVDF, PSU, SEBS, TPU and polyetheramides.
They have experimented with a three-step process: sheet extrusion, crosslinking and foaming as compared to conventional extrusion and injection moulding.
The new process was most suitable for less stiff materials such as TPE.
The polyetheramide foams (Pebaxfoam) gave good breathability, high energy recovery, flexibility at low temperatures and compression set.
RWTH Aachen University has looked at the effect of varying the diameter of talcum particles (a passive nucleating agent) on PE foam.
They examined the four parameters affecting foam structure in extrusion: varying the physical blowing agent content; increasing the content of nucleating agent; the pressure gradient at the die exit; and the shear rate in the die.
Professor Michaeli spoke about analysing foam structures.
While Dr Lee of Sealed Air discussed the analysis of extruded PP/PS interpolymer.
The University of Manchester has developed technology to overcome the poor heat transfer properties of polyolefins.
A combination of conventional heating to expand the surface of the material is combined with microwave heating to expand the interior.
The University of Valladolid has exmained thermal conductivity, acoustic absorption and creep properties of polyolefin foams to create customised materials.
Professor Chul Park spoke about extending the foamability of polypropylene, by tailoring the melt strength and crystallisation kinetics.
Laval University covered studies of LDPE recycling with azodicarbonamide as the foaming agent.
Sulzer Chemtec has a new physical blowing agent technology, Optifoam, that can be retrofitted to existing equipment.
The system comprises a special nozzle, which is mounted at the downstream end of an injection moulding machine or extruder.
Trexel covered microcellular foaming technology.
Berstorff have looked at twin screw technology where up to three different blowing agents and polymers with different melt flow indices and additives can be mixed in one stage.
Professor Lindt of the University of Pittsburgh described foaming polystyrene using carbon dioxide and HFC and an HCFC.
BASF presented information on ways to improve the thermal insulation properties of polystyrene foam including Styropor and Styrodur.
The conference gave delegates the chance to network with experts in the field of Blowing Agents and Foaming Processes and it was a successful event for the new Smithers Rapra company.
• Smithers Rapra: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
