Product category:
Oil & Gas Fiscal Flowmetering systems
News Release from: Rhomax Engineering | Subject: FH8500
Edited by the Processingtalk Editorial
Team on 13 August 2004
Custody Transfer Multipath ultrasonic
flowmeter
Rhomax Engineering present details of the new Faure Herman FH8500 Multipath ultrasonic flowmeter for Custody Transfer Applications: with 18 paths the unit meets OIML Recommendation R117 class 0.3
Rhomax Engineering has announced that details of the new Faure Herman FH8500 Multipath ultrasonic flowmeter for Custody Transfer applications will be available at the Offshore Systems Exhibition in Aberdeen The FH8500 is a new fiscal and custody transfer 18 path ultrasonic flowmeter, designed for Oil industry applications like Production Allocation, FSO and FPSO metering, Tanker Off-Loading, Crude and Refined products pipeline transportation, and Storage management
This article was originally published on Processingtalk on 28 Jul 2004 at 8.00am (UK)
Related stories
Online density and viscosity measurements in tanks
New range of digital density and viscosity meters available from Rhomax make real time density and viscosity measurements in tanks easier, even when the tanks have special linings
The FH8500 meets International measurement standards such as OIML Recommendation R117 class 0.3, with a rangeability over 10:1, over a viscosity range of 0.1 to 200cSt.
Accuracy is specified at 0.15% with repeatability to 0.025%.
The 18 paths used to monitor flow rates, from 12 non-intrusive, site replaceable transmitter sensors, have been shown to allow computation of total flow independent of velocity profile effects such as swirl and asymmetric flow.
Available for pipes from DN 150 to 450 initially, the units are approved for installation in Zone 1 Division 1 Groups C and D.
Above all the unit has a low installation and ownership cost.
• Rhomax Engineering: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page

