Product category:
Cooling and Heat Tracing systems
News Release from: Rittal | Subject: Air-water heat exchangers
Edited by the Processingtalk Editorial
Team on 09 June 2003
New 4Kw or 5Kw enclosure air-water heat
exchangers
Rittal have extended their range of air-water heat exchangers to include units of 4kW and 5kW.
The units can be mounted on the enclosure roof or wall and have been manufactured for 230V electrical supply Equipped with modern electronic safety devices, including condensate sensors and collective fault signals, so that if, at any time, a component stops functioning, the rise in temperature will immediately signal the alarm
This article was originally published on Processingtalk on 9 Aug 2004 at 8.00am (UK)
Related stories
5kW and 7kW enclosure air-water heat exchangers
Rittal have extended their range of air-water heat exchangers to include units of 5kW and 7kW, for mounting on the roof or wall of electrical enclosures they have condensate and leak sensors
The design of these units incorporates only two working parts, a solenoid valve to regulate water and a fan unit to circulate cool air.
The body is protected using a multi-level paint finish to minimise both degradation and maintenance whilst maximising reliability.
Both versions have been constructed using high airflow fan units to increase enclosure air change rates, as well as a new advanced cooling circuit, to assure high cooling power even with low water flow rates or higher water temperatures.
Both units are supplied with accessories to allow external or internal mounting, and include a multi-lingual installation manual.
The units are stocked comprehensively within the UK and are available off the shelf for immediate delivery. Request a free brochure from Rittal ...
• Rittal: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
