Product category:
Boilers, Heat Exchangers, Dryers and Refrigeration
News Release from: Rittal | Subject: Air-water heat exchangers
Edited by the Processingtalk Editorial
Team on 09 August 2004
5kW and 7kW enclosure air-water heat
exchangers
Rittal have extended their range of air-water heat exchangers to include units of 5kW and 7kW, for mounting on the roof or wall of electrical enclosures they have condensate and leak sensors
Rittal have extended their range of air-water heat exchangers to include units of 5kW and 7kW that are designed for 230V electrical supply For mounting on the roof or wall of electrical enclosures the units are equipped with modern electronic safety devices including condensate and leak sensors as well as a collective fault signal
This article was originally published on Processingtalk on 9 Jun 2003 at 8.00am (UK)
Related stories
New 4Kw or 5Kw enclosure air-water heat exchangers
Rittal have extended their range of air-water heat exchangers to include units of 4kW and 5kW.
If any component stops functioning, the raise in temperature will trip the over-temperature alarm.
Incorporating only two working parts, a solenoid valve to regulate water and a fan unit to circulate cool air, the protected body maximises reliability in temperatures up to 70C.
Both versions have been constructed using high airflow fan units to increase enclosure air change rates, and a new advanced cooling circuit to assure high cooling power even with low water flow rates or higher water temperatures.
Supplied with accessories to allow external or internal mounting the units, accompanied by a multi-lingual installation manual, are stocked comprehensively within the UK and are available of the shelf for immediate delivery. Request a free brochure from Rittal ...
• Rittal: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
