Product category:
Hazardous area interfaces, Enclosures
News Release from: Rittal | Subject: Outdoor enclosures
Edited by the Processingtalk Editorial
Team on 20 August 2004
Enclosures for outdoor applications
Three new enclosures have special design features for economical outdoor applications.
Three new enclosures have special design features for economical outdoor applications The enclosures, all 350mm deep, are available in sizes of 800 x 1200, 1200 x 800 or 1200 x 1200mm
The roof plate is screwed-fastened at the correct distance for permanent air circulation to prevent the formation of condensation without major technical input such as heaters or fans.
The bonded insulating plate in the roof additionally helps to prevent the formation of moisture drips.
Mounting is either directly on the base, on a concrete base/plinth, or on a wall and by dismantling the roof plate one enclosure may be mounted on top of the other.
Available in sheet steel zinc plated or stainless steel grade 304, the enclosure has a closed back and sides with a single door for the 800mm wide and double doors for the 1200mm with door lock prepared for the DIN18254 lock insert. Request a free brochure from Rittal ...
• Rittal: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
