Product category:
Hazardous area interfaces, Enclosures
News Release from: Rittal | Subject: Heaters
Edited by the Processingtalk Editorial
Team on 23 November 2006
Enclosure heaters for cruel environments
For enclosure systems which operate in extremely cold environments, down to -33C, Rittal offer compact 800W and 1kW heaters, available off-the-shelf
For enclosure systems which operate in extremely cold environments Rittal offer 800W and 1kW heaters Available off-the-shelf, the units have the ability to operate in severe conditions down to -33C
This article was originally published on Processingtalk on 14 Mar 2003 at 8.00am (UK)
Related stories
Solution for condensation problems
Rittal hygrostats and heaters prevent condensation, which is the primary cause of oxidation and can cause serious damage to expensive equipment housed in an enclosure - which can cause problems
Weighing only 2.3kg and measuring 325 x 85 x 225 mm the 1kW heater is discreet, yet provides the necessary power required.
The 800W unit has a small space requirement of only 150 x 82 x 110 mm.
Both systems have a range of approvals including CE, CUL, and UL.
Originally conceived for outdoor telecommunication applications the heating systems were designed for large enclosures, but their success and reliability in subsequent smaller applications, involving both the prevention of cold temperatures and high humidity within smaller enclosures, has proven to be unquestionable.
Available with a natural aluminium finish and connecting cable with wire end ferrules, the systems are compatible with Rittal hygrostats and thermostats that prevent damage caused by condensation and extreme conditions. Request a free brochure from Rittal ...
• Rittal: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page

