Product category:
Hazardous area interfaces, Enclosures
News Release from: Rittal | Subject: RiLine NH
Edited by the Processingtalk Editorial
Team on 18 December 2007
Isolated safety with RiLine NH on-load
isolators
Rittal RiLine NH on-load isolators provide safe, reliable isolation protection from down-stream electrical equipment
Isolated Safety with Rittal RiLine NH On-Load Isolators Rittal RiLine NH on-load isolators provide safe, reliable isolation protection from down-stream electrical equipment Available either with or without fuse monitoring, the isolators range from 100 to 630 amps (60mm), sizes 000 to 3 and can be easily mounted directly onto the Rittal range of busbar systems
This article was originally published on Processingtalk on 11 Mar 2003 at 8.00am (UK)
Related stories
Mouse pad for gloved operators
The new, patented mouse pad from Rittal is designed for those who prefer using a mouse to micro-joystick or touch-pad control
Utilising either the electronic or electromechanical fuse monitoring allows quick fault diagnostics.
If a fuse blows, a signal is immediately sent to advise of the need for quick replacement without effecting plant availability.
The fitting of a micro switch indicates the switching position of the isolator lid to the control desk/room.
The cable outlet may also be swapped from the top to the bottom using the same device thereby cutting warehouse costs by up to 50%.
To prevent unintentional opening of the isolator lid, all designs have a screwdriver-operated lock as standard; the lock position may also be sealed with sealing wire if preferred.
A sliding window incorporated into the isolator lid contains a unique spring mechanism, which automatically closes the holes after voltage testing. Request a free brochure from Rittal ...
• Rittal: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
