Visit the Flotech Solutions web site
Click on the advert above to visit the company web site

Product category: Filters and Centrifuges
News Release from: Rosedale Products Europe | Subject: Model 82
Edited by the Processingtalk Editorial Team on 07 December 2006

New dual fluid filter for extra flow
capacity

Request your FREE weekly copy of the Processingtalk email newsletter. News about Filters and Centrifuges and more every issue. Click here for details.

Dual filters introduced for extra flow capacity: designated Model 82 these fluid filters have two housings piped together with common porting for parallel operation

Designated Model 82, a new dual fluid filter design uses two housings piped together with common porting for parallel operation They are based on the standard Rosedale Model 8 units and effectively double the equivalent Model 8 dirt holding and flow capacities

Units can be used either as bag filters or as basket strainers without modification and are supplied in two lengths to carry size 1 or size 2 industry standard filter bags allowing up to 1660 l/min flow rates.

Inlet and outlet ports for 2, 3, 4 or 6inch diameter pipe sizes are fitted with 150psi or 300psi rated ANSI flanges.

Housings are available in carbon steel or stainless steel and each housing is clamped in a tripod support which allows some adjustment in elevation when connecting to system pipework.

When used as filters, the housings carry stainless steel baskets designed to hold disposable or cleanable industry standard fabric bags.

Rosedale filter bags come in a very wide range of materials, which together with several cover seal materials, cater for most operational conditions.

Filtration levels are from 800 micron with absolute ratings down to one micron if required.

Rosedale bag sized pleated cartridges will further increase dirt holding capacity.

When used as strainers, the housings carry stainless steel baskets perforated from 1.6 mm to 6.35 mm diameter with three intermediate sizes.

The baskets can be lined with stainless steel mesh sizes from 20 to 200 for finer cleanliness levels.

Increased service intervals via dual stage filtering can be achieved by fitting coarser media within the main media to provide a pre-filtering function.

No tools are required when cleaning or replacing the element; each housing cover is retained by three eyebolts which when loosened, swing down to allow the covers to be lifted off.

Rosedale Products Europe: contact details and other news
Email this article to a colleague
Register for the free Processingtalk email newsletter
Processingtalk Home Page

Search the Pro-Talk network of sites

Visit the Dichtomatik web site
Visit the Flotech Solutions web site