Latest news on Processingtalk categorised by supplier
R Stahl
Address:
Stahl House 43 Elmdon Trading Estate
Bickenhill Lane
Birmingham
B37 7HE
UK
Telephone: (UK) +44 121 767 6400
http://www.rstahl.co.uk
Our RSS feed for news from R Stahl
Request to receive our free email newsletter each week
Listing of all 19 news releases from R Stahl:
ISpac isolator range now has models for safe areas
For mixed Ex i and non-Ex i signal circuits, users can now draw upon the advantages of the proven ISpac isolator system
News from R Stahl (16 June 2008)
User-replaceable HMI modules in hazardous areas
Unlike comparable products, panel PCs from the R Stahl HMI Systems 'Open HMI' series consist of service-friendly modules with individual explosion-protection
News from R Stahl (26 May 2008)
Field device coupler Exi units on an Exe fieldbus
Connect intrinsically safe Foundation Fieldbus H1 or Profibus PA devices to up to four spurs, enabling a quick and reliable link-up to a non-intrinsically safe Exe fieldbus trunk
News from R Stahl ( 5 February 2008)
Remote I/O system for hazardous areas
R Stahl introduces a new version of the IS1 remote I/O system for hazardous areas, which can communicate via Modbus TCP and thereby qualifies for industrial Ethernet environments
News from R Stahl (31 January 2008)
ToughLux repair light for Ex zone 1
Equipped with an aluminium base and a polycarbonate housing pipe, the new Stahl ToughLux light for hazardous areas weighs less than a kilogram: see this on display at the HazardEx event in February
News from R Stahl (30 January 2008)
Cable glands approved for hazardous areas
The R Stahl new Series 8160 brass metric cable glands are approved for use in both Zone 1 and 2 hazardous areas and also in Zone 21 and 22 areas which are subject to dust explosion risks
News from R Stahl (12 December 2005)
First hazardous area Ethernet operator interfaces
EtherNet/IP, the industrial interface for use on standard Ethernet hardware is now supported by R Stahl hazardous area HMI systems, giving seamless office to plant floor integration
News from R Stahl (14 October 2005)
New rugged lighting for zone 2 hazardous areas
The R Stahl new pendant lighting range has been expanded for zone 2 use, allowing users to install a complete installation of pendant lighting in food, chemical plant and offshore installations
News from R Stahl (15 September 2005)
R Stahl HMI Systems presents the Open HMI series
The Open HMI series is a powerful range of Ex approved panel PCs with standard hardware interfaces and a standard operating system that supports vendor-independent applications
News from R Stahl ( 5 September 2005)
New control units for safety in dusty environments
R Stahl has optimised its successful type 8040 control units - designed for use in areas where combustible dusts are a hazard, such as mills, malting plants and milk powder manufacturing facilities
News from R Stahl ( 6 July 2005)
Stahl isolators approved for installation on ships
The R Stahl Schaltgeraete IS Pac isolator system has been approved by DNV (Det Norske Veritas) for installation on ships and offshore platforms
News from R Stahl (23 May 2005)
Rugged laptops approved for ATEX zone 2
A new hazardous area laptop developed between Stahl and Panasonic is launched internationally this month, providing a range of robust, portable PC-based HMI systems
News from R Stahl (19 May 2005)
Enhanced mini CLIX Ex plug connectors
An updated and optimised version of the Stahl mini CLIX plug connector system lets users install, service or exchange all devices and systems during Zone 1 operation, without disconnection
News from R Stahl (12 May 2005)
New intrinsically safe isolator has IS in and out
A new intrinsically safe isolating repeater from R Stahl Schaltgeraete provides Ex-safe electrical isolation between two earthed circuits, and is approved for use in ATEX zones 1 and 21
News from R Stahl (27 April 2005)
Intrinsically safe power supply meets the demand
A new power supply has been designed by the R.Stahl explosion protection division, that can supply more power to field devices whilst remaining intrinsically safe
News from R Stahl (31 March 2005)
New generation of explosion-protected connectors
A new generation of explosion-protected plugs and sockets is now available for use in Zones 1, 2 and 22: the SolConeX series builds on the well-known and highly successful CES series
News from R Stahl (31 August 2004)
Intrinsic safety engineering comes to fieldbus
Technical background article Over the past 30 years, intrinsically safe (IS) explosion protection has developed into a mature and widely accepted technology: with fieldbus, intrinsic safety engineering must take a new direction
News from R Stahl ( 1 September 2003)
30 June 2003 - ATEX goes live
Technical background article After seven years, the transition period is almost over: on 30 June 2003, equipment suppliers will no longer be able use 'old approach' EC directives to operate in the European Union
News from R Stahl (19 May 2003)
Stahl launch new generation IS isolator series
Paving a new direction in safety isolation, R Stahl has launched the IS isolator series, an innovative and future-leading series of modules for intrinsically safe circuits
News from R Stahl (29 April 2003)
