Product category:
Tanks, pipework, nozzles, tube fittings
News Release from: Staubli UK (Connectors) | Subject: Multi-Coupling connectors
Edited by the Processingtalk Editorial
Team on 13 October 2004
Multi-Coupling connectors save time
Assembling an array of quick release connectors onto a single multi-coupling plate provides quick and simultaneous connection of all services eg air, water, hydraulics, electrics and data
Assembling an array of quick release connectors onto a single multi-coupling plate provides quick and simultaneous connection of all services eg air, water, hydraulics, electrics and data It can often produce the most significant single improvement in changeover times for applications as diverse as automotive engine test beds, railway rolling stock bogies, robot tool changers as well as injection moulding machines
This article was originally published on Processingtalk on 13 Aug 2008 at 8.00am (UK)
Related stories
Simultaneous connections for air, fluids and power
Staubli, and sister company Multi-Contact, have developed a system for the simultaneous connection of air, cooling fluids and electrical circuits: it is called the CombiTac programme
Staubli multi-couplings for engine test cells
Staubli multi-couplings provide the secure, automatic, leak free connections operating at the heart of Perkins impressive new engine testing facilities at their Peterborough factory
Staubli, the specialists in quick release connectors, have a comprehensive range of connectors for pneumatic, hydraulic and electrical applications; a selection of these can be located on the same multi-coupling plate as required by the specific application.
This is the Staubli MCS range of tailor made multi-couplings.
Experienced Staubli engineers review the requirements of the specific application to determine the precise specification for the multi-coupling plate.
Further reading
Security of natural gas odorising systems ensured
Staubli HCB couplings provide the secure, reliable, quick release connections which are required by Robinson Brothers for use in the production of gases for their Natural Gas odorising systems
Absolutely leak-free large couplings now available
Staubli, celebrating 50 years in connectors this year, have introduced much larger sizes to their well established HCB range of dry break, non-spill couplings
Quick release connectors on cooling circuits
Staubli quick release connectors on the cooling circuits of medium voltage inverters produced by Converteam significantly adds to the functionality and ease of use of these advanced electrical systems
This will take into account the following parameters: • Type of fluid • Pressure • Temperature • Type of valving (single shut-off, double shut-off or unvalved) • Type of fitting • Non-spill requirements • Electrical connector requirements • Amperage • Voltage • Number of pins • Environmental constraints • Temperature • Climatic conditions • Marine environment • Frequency of connection/disconnection • Space envelope available.
From this data Staubli will design and manufacture a specific multi-coupling solution based on their standard range of connectors.
This will include modular quick release couplings and electrical connectors, guiding and centring components as well as connection and locking systems.
The use of multi-couplings dramatically improves safety.
Connection can only be made in one position, eliminating any risk of circuit inversion and mis-connection.
Connection of the plates can be either manual or automatic as required and seals will be selected to suit the fluids involved.
An example of the benefits to be achieved through the use of mutli-coupling plates is at Triumph Motorcycles in Hinckley where mould change times in the injection moulding shop were reduced by 30%.
A target time of 20 minutes for the tool change was set, which with tools weighing up to 8 tonnes, a rapid automatic multi-coupling system was needed.
Staubli RMI 212 couplings were selected for the water system, which was operating at high pressure (6 bar) and RMP 48 couplings for the hydraulics.
Both connectors were placed on a multi-coupling plate and connection to the mould made via special brackets located on the tool side.
Tool change times at Triumph reduced to 22 minutes on the 420Tonne IMM and 26 minutes on the 1300Tonne machine.
The Staubli multi-coupling removed any danger of mis-connection and shaved at least 10 minutes off the tool change time.
Times are expected to reduce further towards the 20 minute target as the operators become practised in using the system.
Staubli multi-couplings are designed specifically for each application.
Detailed consideration early in a project of the connections required can bring significant benefits in terms of time saving, safety and reliability of operation.
Staubli is an international family owned group founded over 100 years ago in Switzerland employing 3500 world-wide.
The Couplings Division manufacturing facilities are headquartered in France with additional manufacturing in Italy and Germany.
Offices are located across Europe, North and South America and the Far East; the UK base is in Telford. Request a free brochure from Staubli UK (Connectors) ...
• Staubli UK (Connectors): contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
