Material-dispense valve delivers precise shots

The new Model 2600-035 Tip-Seal high-volume dispense valve is designed for precision dispensing of medium- to high-viscosity adhesive and sealant materials

The new Model 2600-035 Tip-Seal high-volume dispense valve is designed for precision dispensing of medium- to high-viscosity adhesive and sealant materials.

The valve opens and closes the material passage at the tip of the nozzle to precisely start and stop material flow, and prevent oozing and dripping.

Combined with positive-displacement meters, the Tip-Seal valve delivers precise shot volumes and exact bead profiles.

The Sealant Model 2600-035 valve is ideal for use with materials that air dry or cure, such as silicones or polyurethanes.

Sealing at the valve tip prevents material from hardening in the nozzle.

The Tip-Seal valve is also used in high-speed stitching, or repetitive on-off applications where short segments of material are deposited onto a surface.

Material is delivered to the Tip-Seal valve either by a metering assembly or under regulated pressure from supply tanks or pumps.

The dispense rate can be altered during the dispense process to provide a variety of bead-profile sizes and material-flow rates.

Pneumatically actuated, the Tip-Seal valve has large fluid inlet and outlet ports and wear-resistant fluid seals to extend its life.

The valve body slots and precision dowel holes allow easy and accurate mounting.

Detailed information about the valve is available via a direct Web site link.

Sealant Equipment, a leading manufacturer of precision meter-mix dispense systems and fluid-dispense valves, is registered to ISO 9001:2000.

Back to top