Product category:
Metering pumps and dosing systems
News Release from: Sealant Equipment and Engineering | Subject: Tip-Seal dispense valve
Edited by the Processingtalk Editorial
Team on 20 October 2006
New high-volume dispense valve prevents
dripping
The new Sealant Equipment and Engineering Tip-Seal dispense valve is designed for high flow rates and precision fluid control of level-seeking materials
The new Sealant Equipment and Engineering Model 2600-001-006/7 Tip-Seal dispense valve is designed for high flow rates and precision fluid control of level-seeking materials It is ideal in applications requiring high-volume fluid transfer, precise level control for filling operations and dripless valve shut-off
This article was originally published on Processingtalk on 11 Jan 2006 at 8.00am (UK)
Related stories
Tip-Seal dispense valve delivers precise beads
The new Sealant Equipment and Engineering Tip-Seal dispense valve is designed for precision dispensing of low and high-viscosity flowable material
Adjustable stroke no-drip mix-dispense valves
The new 2200-545 Series adjustable stroke mix-dispense valves are designed for controlled flow of 2-component adhesives and sealants such as silicones, epoxies, urethanes and acrylics
Low volume servo-drive shot meter for adhesives
The new Servo-Flo 401 Series servo-motor drive meter system is designed to apply small precision beads and small precisely metered shots of adhesives, sealants or lubricant materials
The valve assembly consists of a double-acting actuator, a 13.7inch (350 mm) long extension nozzle and a carbide Tip-Seal needle to prevent dripping fluid material at shut-off.
For high-volume fluid transfer, the Tip-Seal Valve can flow up to 6 gpm (22.7 lpm) with the 0.406inch (10.3 mm) orifice nozzle.
For accurate filling of housings, containers and vessels, the optional level-sensing probe and controller is used to automatically stop the flow of material when the desired fluid level is reached.
The Tip-Seal high-flow valve design dispenses 1-component adhesives, sealants and lubricants such as acrylics, epoxies, polyurethanes, silicones, oils and grease.
The valve opens and closes its carbide needle to precisely start and stop material flow.
The 29:1 air-to-fluid power ratio provides instantaneous on-off control of material flow.
The valve has 3/4-NPT fluid-inlet ports for high-volume flow of materials.
The Tip-Seal dispense valve is double-air-operated through 1/4-NPT ports to ensure positive start and stop of material flow.
The valve includes two holes for mounting and two dowel holes for accurate positioning.
Sealant Equipment and Engineering is a leading manufacturer of precision meter-mix dispense systems and fluid-dispense valves.
The company designs, manufactures and integrates precision-engineered systems and equipment to supply, proportion, control, meter, mix and dispense a wide variety of one-, two- and three-component adhesives, sealants, lubricants and other materials.
• Sealant Equipment and Engineering: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
