Product category:
Level and tank contents instrumentation
News Release from: SensorsOne | Subject: ATM/N Depth Pressure Transmitter
Edited by the Processingtalk Editorial
Team on 19 July 2006
Level sensor for corrosive and hazardous
media
The ATM/N Depth Pressure Transmitter not only measures the level of fresh water but also more corrosive media such as sea water, brackish water, waste water, hydrocarbons and other corrosive chemicals
The ATM/N Depth Pressure Transmitter not only measures the level of fresh water but also more corrosive media such as sea water, brackish water, waste water, hydrocarbons and other corrosive chemicals The ATM/N level transmitter can be used in salt water if the all titanium body option is specified and when hydrocarbons or other corrosive chemicals are present the ATM/N/Ex ATEX version with FEP (Fluorinated Ethylene Propylene) jacketed cable can be specified, to ensure the sensor is fully compatible with the applications typically found on landfill sites or petrochemical sites
This article was originally published on Processingtalk on 24 May 2006 at 8.00am (UK)
Related stories
Digital autozero and span makes calibration easier
SensorsONE is launching the NEW digital autozero and span option for the Gefran TK industrial pressure transmitter and the TPSA precision pressure transmitter
Add life to a pressure transmitter! Use a display
SensorsOne launches exclusively the NEW Gefran TDP loop powered plug-in display for pressure transmitters
The ATM/N/Ex ATEX approved level sensor is also suited to waste water applications where low ranges are required for open channel flow measurements.
The ATM/K/N/Ex flush face diaphragm version is ideal for measuring level of sewage treatment tanks which reduces clogging of the diaphragm and makes it easy to clean.
The pressure sensing technology is a highly stable semiconductor strain gauge element which is isolated from the media via a stainless steel or titanium membrane which is backfilled with a silicone oil filling.
For measuring levels in sewage treatment tanks, flush faced ceramic sensing technology is utilised which provides a diaphragm surface which is highly abrasion resistant and easily cleaned.
The pressure ranges start from 1 mH2O gauge and rise up to 250 mH2O gauge with accuracy options of 0.1% FS, 0.25% FS or 0.5% FS.
The electronics can be 4-20mA current output or amplified voltage 5 or 10 volts, and a lightning protection circuitry option can be added if required.
To make servicing easier a detachable cable version can be used which makes it possible to interchange sensors without removing the cable installation and stock spares without having to cover combinations of pressure ranges and cable lengths.
The ATM/N is a truly versatile level transducer for all submersible applications across a wide range of liquid media.
• SensorsOne: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
