Product category:
Hazardous area interfaces, Enclosures
News Release from: SAREL | Subject: Spacial 3D
Edited by the Processingtalk Editorial
Team on 01 June 2004
Spacial 3D enclosures from Sarel
The new range of Spacial 3D metal wall mounting enclosures from Sarel responds to market expectations and replaces the 3000 range, that has given total satisfaction to millions of users for 20 years
The Spacial 3D enclosure has high resistance to mechanical impact IK10 and excellent protection against entry of water and dust with degree of protection IP66 Three major priority application fields have been identified: electrical energy distribution serving connection and electrical protection requirements, industrial control and finally electronics and networks
This article was originally published on Processingtalk on 18 Nov 2004 at 8.00am (UK)
Related stories
FieldBusPlug device provides solution for fieldbus
ABB now offers equipment such as its new FBP motor controllers and starters, with a neutral fieldbus-independent interface: the installer attaches the FBP cable configured for his specific fieldbus
Videographic recorders for 21CFR Part 11 use
The ABB InformIT SM Series Videographic Recorders now have documentation detailing their compliance with the FDA 21 CFR Part 11 regulations concerning the use of electronic recorders for process data
Sarel has developed ranges of "universal" and "application" enclosures to strengthen its presence in these three application fields.
A range of 10 enclosures for modular electrical distribution.
Of depth 150 mm, these enclosures enable assembly of 24 to 240 modular elements.
Further reading
Feature-packed large screen videographic recorder
The new ABB large screen InformIT SM3000 multipoint videographic recorder offers one of the widest range of security, recording and display features available in a single unit
Sensor to PC interface is simple
Do you ever hold the end of a cable from a sensor and think "I wish I could just plug this into a PC"? Well with the DataShuttle unit, you can
Data acquisition steps up
DataShuttle has introduced many people to the concept of plug-and-play data acquisition: connect your sensors to the DataShuttle, add a PC port, and you're ready to start taking measurements
They are fitted with a glazed bonded toughened glass door and with cable gland plates top and bottom.
Enclosures have pre-mounted chassis and depth adjustable DIN rails for clip-in mounting of protection equipment.
Metal front panels, also clip-in, assure electrical protection of users.
A range of 12 sockets enclosures conforming to IEC 309 standard: six of these enclosures have door-mounted sockets, and six have side-mounted sockets.
Enclosures are delivered with sockets pre-mounted so the customer makes saves on drilling.
Enclosures are painted after drilling, guaranteeing improved corrosion resistance.
These enclosures are fitted with 2P+E and 3P+E sockets, in 220V and 380V.
Protection levels, IP 44 or IP 66 are proposed.
Enclosures have pre-mounted perforated chassis and symmetrical rails.
So ordering is easy: just one reference required to order a complete solution comprising enclosure, chassis, sockets and earthing collector, all in a single pack that can be reused after wiring.
For industrial applications, 41 enclosures with plain door and 38 with glazed door.
Internal equipment mounting is on 5 chassis types: plain, plain silk-screened, micro-perforated, perforated-telequick and with symmetrical DIN rail.
The standard cable gland plate is pre-traced to facilitate drilling.
This standard cable gland plate can be replaced by three alternative types: in steel with knock-outs to eliminate drilling, in aluminium to avoid electromagnetic interference, or with a rubber membrane enabling no-tool cable passage and offering excellent protection.
The standard 3 mm double bar closure can be easily replaced by alternative locks and security devices.
Numerous accessories enable even more specific solutions to particular customer requirements: canopies, plinths, internal doors, 180§ opening hinges, 800 mm height aluminium support pillar, etc For enclosure temperature control, Sarel proposes a comprehensive range of resistance heaters, fans and a new mini-conditioner with 270 W cooling power.
A range of 8 terminals enclosures, sizes from 250x300x150 mm to 400x800x150 mm, designed mainly for machines and production lines.
Door opening is to 180§ for improved access to the enclosure interior.
Enclosures are supplied with pre-mounted plain chassis and DIN rail for terminal block fixing.
A new range of elegantly designed control and man-machine dialogue enclosures, comprising 7 enclosures in sizes 300x300x200 mm to 800x600x300 mm.
A wide choice of arms, articulations, extensions, brackets, etc provide solutions for varied uses of enclosures up to 150 kg weight, offering perfect ergonomics and total safety, A rear door provides total access to the enclosure interior.
A wide range of accessories is available: keyboard enclosure, lighting, document holder, laptop support shelf, etc Two types of enclosure for electronics and networks applications: a 'single-body" enclosure with fixed or swing chassis height 4 to 17 U, or a "double-body" enclosure height 5 to 17 U and depth 400 or 500 mm, again with glazed door.
19'' chassis are pre-mounted.
• SAREL: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
