Product category:
Position, speed and torque measurement
News Release from: Sensor Technology | Subject: Torqsense
Edited by the Processingtalk Editorial
Team on 20 May 2004
German manufacturers see the sense in
Torqsense
British innovation looks set to storm through German industry, following the massive interest generated by the launch of the new Sensor Technology non-contact torque sensor at the Hanover Fair
British innovation looks set to storm through German industry, following the massive interest generated by the launch of the new Sensor Technology non-contact torque sensor at the Hanover Fair To date measuring torque in a rotating shaft has involved complicated engineering to set up a system of slip rings or other expensive measurement techniques
This article was originally published on Processingtalk on 23 Jan 2006 at 8.00am (UK)
Related stories
New torque sensor to revolutionise machine control
Sensor Technology will show TorqView2 at MTEC, a complementary software programme that generates a visual instrumentation display of the output of all torque transducers in the TorqSense range
New premises enable Global expansion
Expansion plans have been put in train at high technology torque measuring company Sensor Technology, with a move to additional premises for the operational staff to prepare for future growth
Because of this torque measurement has been confined to only specialist areas of control engineering, such as research and development.
Close monitoring of drive shafts would provide accurate real time information on the performance of production machines in every sector, but to date has not been practical in the vast majority of situations.
Senor Technology, based in Banbury, UK has been working on non-contact shaft monitoring for some years and used the Hanover Fair for the European launch of its new RWT310/320 series of Torqsense rotary torque sensors.
Further reading
New torque sensor revolutionises machine control
Sensor Technology will be showing their new revolutionary RWT-310 and RWT-320 Torqsense rotary torque sensors at the Instrumentation South Exhibition
Ensuring an accurate feel on power steering
A dynamometer for testing 180 motors per hour for vehicle electrohydraulic power assisted steering, uses a non-contact torque transducer to ensure complete accuracy of the readings.
Torquing up hardware and software
M-Tec exhibition will showcase both new hardware and new software: Torqview II is a software programme that generates a virtual instrumentation display of of the output from a Torqsense transducer
This encapsulates the techniques they have perfected and is designed for serial production so that it can be introduced to mainstream engineering.
"We expected plenty of interest from show visitors representing the academic and R and D end of engineering," says Tony Ingham of Sensor Technology, "but thought we might have to fight a bit to whip up enthusiasm among plant and control engineers from manufacturing and process environments.
How wrong we were!".
He thinks that the interest in Torqsense illustrates one of the fundamental strengths of the German engineering and manufacturing sectors.
Many of their engineers, even those in quite junior positions, hold doctorates, so are highly conversant with the concept of developing and applying innovative ideas.
They also tend to serve their time on the shop floor where they learn not only the practicalities of engineering but also how and why to push through new working methods.
"German factory engineers spend their days at the leading edge of technology and have budgets for developing new ideas," observes Ingham.
"When they see something new they run down their own mental check list of places where they could apply it.
If they get more than a couple of ticks their antennae go up.
"Because most machines include at least one important rotating shaft, they saw Torqsense and wondered if it was Christmas".
Torqsense does not need physical contact with the shaft it is monitoring; instead it uses a radio frequency (RF) coupling to both power and read the output of a tiny piezoelectric comb mounted on the shafts surface and acting as a hypersensitive strain gauge.
During rotation all shafts twist at a microscopic level and this deforms the comb so that its fundamental frequency changes.
The twist and therefore the frequency change are directly related to the torque in the shaft, so monitoring the comb gives a direct measure of torque.
The RWT310/320 Torqsense is designed for plug and play fitting.
It comes with integral electronics, outputs for torque, speed, power and angle, analogue and/or and digital outputs, and is directly compatible with most popular PC Interfaces.
It is user programmable, a feature Sensor Technology worked hard to perfect fearing that if it were difficult to use it would remain a tool for development 'boffins' rather than being attractive to the full range of engineers.
Other innovative features include built-in peak torque sampling, storage and torque averaging, and a self-diagnostics test package.
Both the RWT 310 and RWT 320 can operate from a wide range of supply voltages.
"Hanover is of course an international event and we saw engineers from many, many countries, but it was the Germans' enthusiasm that we were most pleased with. Request a free brochure from Sensor Technology ...
Germany is still the powerhouse of European manufacturing, it is well positioned to influence the newest EU members and other countries to the east and its technology is transferring to the new manufacturing economies in Asia.".
• Sensor Technology: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
