Product category:
Separation and Membrane Systems
News Release from: Stroud Instruments | Subject: The 500-TT
Edited by the Processingtalk Editorial
Team on 22 January 2004
Versatile process display with alarms
and BCD o/p
The 500-TT Process Display is a 4.5 digit programmable digit panel meter with three alarm trip points provided as standard: it provides a scaleable display of an analogue signal in engineering units
The 500-TT Process Display from Stroud Instruments is a 4.5 digit programmable digit panel meter with three alarm trip points provided as standard An optional BCD output board is also available
This article was originally published on Processingtalk on 26 Jan 2004 at 8.00am (UK)
Related stories
Versatile process display with alarms and BCD o/p
The 500-TT Process Display from Stroud Instruments is a 4.5 digit programmable digital panel meter with three alarm trip points provided as standard: an optional BCD output board is also available
Programmable trip amplifier provides PV display
Stroud Instruments have introduced a programmable three-point trip amplifier with a display of the monitored variable: it can detect high/low alarm conditions and provide duty-standby pump control
Time-controlled ramp or set-point functions
The new SIL 112-65s provides either a ramp output function or a remote capability to raise-lower the set-point of the PID controller, laboratory process or temperature cycling control
The 500-TT provides a scaleable display of an analogue signal in engineering units.
User configurable scaling to ranges within - 9999 to +19999, input signal selection (most standard process milliamp and voltage signals are accepted) and universal mains power enable spares/stock holding to be kept to a minimum.
Three alarm channels are provided as standard each with a voltage free contact output that change state when the input signal passes an adjustable reference set-point.
Simple to use yet powerful menu-driven software enables fast flexible set-up from the front panel keypad.
The wide range of programmable functions available include input source, input scaling, alarm trip points, delay function, hysteresis, alarm type, alarm relay action and interlocked alarm action.
The high brightness 4.5 digit LED digital readout may be programmed to display the monitored process signal either as the voltage or mA value or in engineering units.
Continuous indication of the status of each alarm channel is provided by tri-colour LEDs.
These states are; non alarmed state, input signal is within the hysteresis or delay band and approaching trip point, in alarm state, input signal has passed trip point and is within the hysteresis or delay band and programming mode.
With the BCD output option, 4.5 digits of display data plus over range and polarity flags are output in five decades of parallel BCD data.
Polarity of the BCD outputs is configurable from the front panel keypad to be either active high or active low.
Outputs are TTL compatible.
The instrument is housed in a 96x48mm one-eighth DIN enclosure and can be supplied with front panel protection up to IP65 as an option.
Universal mains power is provided as standard with the instrument able to operate from a supply in the range 85-265 VAC.
Optional 12VDC and 24VDC powered versions are also available.
• Stroud Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
