Product category:
Shutdown, SIS and safety systems
News Release from: Schneider Electric | Subject: Preventa XPS MC controller
Edited by the Processingtalk Editorial
Team on 01 September 2006
Safety controllers offer flexibility +
simplicity
Approved for SIL3 applications in line with IEC 61508, the new Preventa XPS MC configurable safety controllers from Telemecanique cut cabling time, simplify system design and save money
Approved for SIL3 applications in line with IEC 61508, and Category 4 applications in line with EN954-1, the new Preventa XPS MC configurable safety controllers from Telemecanique, a brand of Schneider Electric, cut cabling time, simplify system design and save money by allowing multiple safety functions to be implemented simultaneously with a single module Preventa XPS MC safety controllers are available with either 16 or 32 safety inputs, and provide eight independent safety outputs
This article was originally published on Processingtalk on 18 Jun 2008 at 8.00am (UK)
Related stories
New Magelis industrial PCs have four models
The new range of Magelis industrial PCs offer tough ruggedised designs, suitability for continuous 24/7 operation, great tolerance to impact and vibration, with global certifications as key benefits
Website unravels 17th Edition wiring regulations
Schneider Electric has unveiled a new section of its website, devoted to explaining the new 17th Edition Regulations and all of the ramifications for electrical contractors, FMs and building engineers
To ensure maximum versatility and to minimise wiring, the controller is configured via software.
They also support communication with PLCs via Modbus, CANopen or Profibus DP fieldbus, as well as offering facilities for direct connection to other types of automation systems.
A library of 30 certified safety functions, covering applications as diverse as emergency stop monitoring and shaft breakage detection, is incorporated in every Preventa XPS MC controller.
Users simply select the functions needed for their specific application with the aid of the Preventa XPS MCWIN software package, which uses convenient drag-and-drop techniques and runs on any modern PC.
This configurability is a particular benefit in applications where full details are not known at the design stage, as the controller can be set up after is received, or even after installation in the control panel.
The Preventa XPS MCWIN software also allows safety configurations to be saved to a CD after validation, for archiving or for easy transfer to other Preventa XPS MC controllers.
LEDs on the front face of Preventa XPS-MC controllers provide instant visual confirmation of status and first-level diagnostic facilities.
Further extensive diagnostic functions are provided, and can be readily accessed via a Magelis HMI terminal, or a fieldbus connection.
For applications requiring fewer safety functions, Preventa XPS MP controllers are available which provide two simultaneous safety functions, selected from a library of fifteen.
Also available are Preventa XPS single-function safety relays which can be supplied in types to cover all common safety requirements.
• Schneider Electric: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
