Product category:
Gas monitoring and analysis
News Release from: Systech Instruments | Subject: 800 On-line Oxygen Analyser
Edited by the Processingtalk Editorial
Team on 14 February 2003
On-line oxygen analyser is fast and
accurate
The Systech Series 800 On-line Oxygen Analyser is a versatile, maintenance free and programmable instrument providing a very fast response to changes in the oxygen content of a process gas
The precision zirconia oxide sensor allows the instrument to measure oxygen concentration from 0.01 ppm to 100% with an exceptionally fast response time of 90% of step change within 5 seconds Accuracy is better than 1% of the measured value and repeatability is 0.2%
This article was originally published on Processingtalk on 17 Dec 2002 at 8.00am (UK)
Related stories
Gas analyser is easy, accurate and programmable.
The new Model 542 gas analyser from Systech monitors gas mixtures easily and accurately, using microprocessor signal processing and autoranging.
Versatile Moisture Analyser for gases.
The new Series 500 Moisture Analyser from Systech combines microprocessor control with a high quality phosphorus pentoxide electrolytic sensor for absolute measurement of moisture content.
The advanced, user-friendly, menu driven software provides a combination of ease of use and flexibility incorporating diagnostic capability, fault alarms and read only mode.
Designed for continuous on-line applications, the zirconia oxide sensor is maintenance free and programmable, timed auto-calibration can be to any oxygen level using ambient air or, for ISO purposes, a certified, traceable gas to meet the most demanding quality assurance regimes.
The Series 800 is insensitive to sample flow rate and unaffected by vibration or position.
The very rapid response and the large, auto-ranging LED display make the analyser especially easy to use and the provision of analogue outputs: high/low and fault alarms, plus RS232/485 communications, make the Series 800 especially suitable for process control, remote monitoring and charting applications.
Choices of sampling systems in brass/copper or stainless steel allow the installation to be matched to each application.
The Systech Series 800 Zirconia Oxygen Analysers, available in 19 inch rack mount, panel/bench and NEMA 4X/IP66 water and weatherproof configurations, provide the highest levels of accuracy, reliability and flexibility under the most demanding industrial operating conditions.
ENDS SYSTECH INSTRUMENTS LIMITED Systech Instruments is one of the world's leading designers and manufacturers of gas analysis instrumentation and has agents and distributors in most major countries.
Systech gas analysis equipment is an essential part of the production process in many industries, including industrial gases, petrochemicals, pharmaceuticals, electronics and food, and is widely used by university and industrial research facilities.
• Systech Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
