Product category:
Separation and Membrane Systems
News Release from: Tecan | Subject: High-accuracy sieves
Edited by the Processingtalk Editorial
Team on 22 April 2003
High-performance process sieves to ASTM
standards
By employing leading-edge electroforming techniques, believed to be the most advanced in the world, Tecan is producing high-accuracy sieves with super-fine apertures, highly consistent across the mesh
The sieves, from Dorset based Tecan, can be supplied in ASTM (American Society for Testing and Materials) standard frames, and unlike traditional frames, can meet or exceed the standard requirement for aperture tolerance Electroforming produces highly-accurate sieves with repeatable consistency, at the lowest possible cost
This article was originally published on Processingtalk on 30 Jun 2003 at 8.00am (UK)
Related stories
Cost-effective encoders satisfy demanding roles
Cost-effective customised optical encoders for virtually any measurement, control or positioning system are now being manufactured to the highest levels of accuracy and performance by Tecan
Deposition masks display significant advantages
Continuing its advance into the provision of next-generation display solutions for the most demanding applications, Dorset based Tecan is experiencing interest in electroformed vacuum deposition masks
Typical applications are found in pharmaceutical, food processing, powder and bulk, medical, electronics (eg solder balls) and measurement markets demanding the highest standards.
The new sieves are fabricated in hard nickel, as opposed to the traditional soft nickel, this significantly boosts operational life, especially where abrasive materials are being processed, such as industrial diamonds.
Easy cleaning and long operational life are resultant advantages of electroforming.
Unlike traditional woven products, the single-sheet sieves do not have cross-over areas, such as those found in woven-wire sieves.
This brings a range of benefits, including the elimination of contamination due to trapped debris, no de-lamination at the edges, consistent cross-sectional thickness and consistently accurate aperture shapes and sizes.
If desired, the sieves can be gold-plated, in-house, for custom needs.
Sieves can be supplied in standard three-inch polycarbonate diameter frames, or eight-inch stainless steel frames, the latter can be full-depth (two-inch) or half-depth (one-inch).
In all cases, the sieves may be specified with or without integral hard-nickel support grids.
Furthermore, the company can also supply sieves with no frames, again with or without integral support grids.
All apertures are highly accurate and, regardless of the aperture size, or shape (square or round), have tolerances of +/- two micron.
• Tecan: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
