Product category:
Fieldbus systems, Fibre-optic systems
News Release from: The Profibus Group | Subject: "IO Link" working group
Edited by the Processingtalk Editorial
Team on 22 June 2006
Fieldbus-independent sensor/actuator
communication
Well-known manufacturers of sensors, actuators and automation technology have established the "IO Link" working group under the umbrella of Profibus International (PI)
Well-known manufacturers of sensors, actuators and automation technology have established the "IO Link" working group under the umbrella of Profibus International (PI) Their goal is to develop the specification for a fieldbus-independent communication interface for intelligent sensors and actuators in production automation
This article was originally published on Processingtalk on 18 Jul 2006 at 8.00am (UK)
Related stories
IO link gains momentum
The "IO Link" working group is developing the specification for a fieldbus-independent communication interface for intelligent sensors / actuators in factory automation
User conference demonstrated application growth
The Profibus and Profinet UK User Conference saw a record attendance of over 70 delegates with many users bringing new staff to benefit from the workshops and technology updates
Profibus training courses available
There are still a few places available on a first-come, first-served basis on the August training courses for Certified Profibus Installer + Engineer/Commissioning courses
The scope of the specification work will focus on the transmission physics (electrical and mechanical properties, topology), sensor/actuator communication with the IO assemblies, a neutral data interface to the higher-level communication system and engineering.
For the "last meter to the process" inexpensive point-to-point connection between sensor/actuator and the I/O assembly is maintained.
Diagnosis and parameter information between sensor/actuator and the automation system will be exchanged with IO Link in addition to the measurement signal through the specified communication mechanism, thereby maximising the performance of state-of-the-art intelligent sensors and actuators.
IO Link makes it possible for users to take advantage of automation solutions with system-wide, open communication to the individual sensor/actuator.
IO Link allows to dynamically change device parameters through the PLC directly or uniform diagnosis information to the sensor/actuator level, as well as to easily exchange devices during operation.
In particular, a "teach-in" can be executed with IO Link for easy and precise sensor settings.
For the user, this means increased system availability, reduced downtimes and shorter maintenance times.
IO Link has been designed as an open interface and can be integrated in all current communication systems in automation.
The mapping is developed on the Profibus, Interbus and Profinet fieldbus systems as a first step.
The standardisation process is on-going in accordance with IEC procedures.
• The Profibus Group: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
