Product category:
Potable water metering and distribution
News Release from: The Profibus Group | Subject: Perth basin water supply control
Edited by the Processingtalk Editorial
Team on 08 January 2007
Water supply automation achieved using
Profibus
Having Profibus in operation on the water treatment plants in the Perth basin enables the Water Corporation control centre to perform detailed problem diagnostics and despatch the resources needed
The Water Corporation of Australia has responsibility for water treatment and environmental management in the Perth basin, in Western Australia With five large water treatment plants within a 50km radius of Perth, their master plan is to have after-hours operations controlled from a centralised operations room at Leederville
This article was originally published on Processingtalk on 11 Jul 2008 at 8.00am (UK)
Related stories
User conference demonstrated application growth
The Profibus and Profinet UK User Conference saw a record attendance of over 70 delegates with many users bringing new staff to benefit from the workshops and technology updates
Profibus training courses available
There are still a few places available on a first-come, first-served basis on the August training courses for Certified Profibus Installer + Engineer/Commissioning courses
To this end Water Corporation has been implementing Profibus DP and PA networks for over four years in both water and wastewater treatment plants.
Profibus will become an integral part of its planned networking of all the metropolitan water treatment plants over the next five years.
Dennis Yovich, Principal Engineer, Electrical, in the Water Corporation Mechanical and Electrical Services Branch, commented: 'We chose Profibus because we wanted a fieldbus technology that would enable us to optimise our management decisions, and support our long-term aim of networking our major plants - initially in the Perth area, and ultimately, across the whole state'.
Further reading
25 million Profibus nodes now installed worldwide
The latest market figures confirm that in April 2008, the number of installed Profibus nodes in ALL manufacturing plants, which includes process plants, broke the 25 million barrier
The background to the new IO-Link
With an aim to improve the total cost of ownership of machines and plants, manufacturers and operators are continually on the look-out for optimisation potential.
IO-Link - The fieldbus gap is now filled!
IO-Link aims to revolutionise the sensor and actuator interface: Profibus introduces IO-Link, that allows all sensor and actuator data to be available throughout the entire plant
Western Australia's many water treatment plants - plus over 980 pumping stations - are spread across 2.5 million square kilometers.
'We need to maximise the information we obtain from these remote sites,' comments Yovich: 'Measurement and control equipment is becoming more sophisticated, there are less and less people available in the remote sites, and the time and distances to reach some of the plants are excessive.
In the event of a problem, we firstly need to know that a problem exists and then we need to access the problem area to analyse what has to be done, who has the necessary skills, and what spares and equipment are required should our tradesmen need to travel to site'.
Profibus represents the ideal solution - for example by enabling centralised maintenance staff to remotely re-range a flow meter, to understand the precise nature of the service required by a distant analyser unit used for the chlorination and dosing of the potable water distribution network, or to be alerted to a faulty gas leak detector.
To explain why flow instruments need to be re-ranged regularly, consider the wide variation in seasonal demand for water, where output rates can swing between from 0-500 ML/day to 0-50 ML/day: so seasonal re-ranging of flow meters is crucial for better resolution, particularly for example to improve accuracy of chlorine dosing and thus meeting ADWG (Australian Drinking Water Guidelines) compliance requirements.
The latest part of the Water Corporation intelligent network using Profibus is the new AU$28 million Water Corporation owned Kwinana Water Reclamation Plant (KWRP).
This is not only Australia's largest municipal wastewater re-use plant, but also the site of the country's most comprehensive application of the Profibus to date.
For KWRP, John Holland Engineering was contracted to deliver the project and they engaged Veolia Water to undertake the process design and commissioning of the plant: electricals and instrumentation were contracted to PCT, and maintenance is handled by KBR Water Services, the maintenance provider for the Water Corporation.
Dennis Yovich explains the particular advantages of Profibus at KWRP as follows: 'The integration of digital I/O, utilising ASi-bus, in the Profibus world - such as alarms, chlorine gas leaks, chlorine residual, low level alarms, empty pipe detection - is exceptional.
We use ASi-bus combined with Profibus PA, making all analogue measurement - such as flow, temperature, pressure, level - and digital switching, completely homogeneous.
This homogeneity is a unique advantage of the Profibus system, and makes so much more data available,' says Yovich.
'The more information we have, the better management decisions we can make - enabling us to boost our management and maintenance efficiencies in unprecedented ways, optimise our processes and, ultimately, to pass on big savings to end-users'.
For the network automation to be successful, it is critical that an operator in the Leederville control centre can perform detailed diagnostics of any instrumentation or control problem across the plants and the distribution network, and then decide what action is required.
Having Profibus in operation on the plants makes much of this possible.
• The Profibus Group: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
