Product category:
Liquid Analysis: pH, Conductivity, ISE
News Release from: Thermo Fisher Scientific | Subject: Orion Ammonia ISE
Edited by the Processingtalk Editorial
Team on 06 December 2007
New Orion high-performance ammonia ISE
Thermo Scientific has developed a new, high performance Orion Ammonia Ion Selective Electrode (ISE) that can measure down to 0.01 ppm quickly and accurately
This electrode is ideal for measuring dissolved ammonia in wastewater or other samples This new electrode was built with years of Orion expertise in the industry with EPA approved methods for wastewater, specifically Standard Methods 4500 - NH3 D and E, ASTM D1426 -98,03 (B) and former EPA method 350.3
This article was originally published on Processingtalk on 11 Aug 2008 at 8.00am (UK)
Related stories
New tribology cell for rheometer product line
Thermo Fisher Scientific launch a new tribology cell for its rheometer product line providing improved insight in surface engineering processes.
Culture media complies with microbial limit tests
Oxoid and Remel introduce complete portfolio of culture media for the microbiological examination of non-sterile pharmaceutical products.
The ammonia electrode can also be used to measure the ammonium ion (NH4+) after converting to ammonia (NH3) or organic nitrogen after Kjeldahl digestion of the sample.
Nitrate samples can be measured using an ammonia electrode.
The use of the Thermo Scientific Orion Nitrate Test Kit makes this possible.
Further reading
Pharma hot melt extrusion trials in India
Thermo Fisher Scientific and Pharma Polymers, a business line of Evonik Industries, have announced a co-operation designed to advance the hot melt extrusion process in the pharmaceutical industry
Recirculating Chiller has 2500W cooling capacity
Thermo Fisher Scientific, the world leader in serving science, has expanded its line of recirculating chillers with the addition of the Thermo Scientific Neslab ThermoFlex 2500 unit
Calcium hardness monitor protects water systems
The Orion 2120XP calcium hardness monitor is the latest product in the next generation of on-line water analysis products for customers in the power and drinking water markets
After samples and standards are made basic, nitrate is converted to ammonia by addition of a special reagent.
Ions, such as chloride, that could cause interference with the nitrate electrode at high levels, have no effect when performing this test with the ammonia electrode.
This technique can be performed on samples containing 0.1 to 20 ppm of nitrate-nitrogen.
Ammonia measurement by ion selective electrode offers many benefits for the user.
A key benefit is cost savings.
Measurement of ammonia by ISE is inexpensive per test as compared to other techniques which require more costly equipment.
In addition, only a small sample size is required and minimal sample preparation is needed.
For example, when testing according to Standard Methods 4500 - NH3 D, sample distillation is unnecessary.
Unlike the Nesslerisation technique for ammonia, toxic metals are not used in the ISE method.
The ammonia electrode can be used over a wide concentration range, from 0.01 to 17,000 ppm as NH3 or 0.01 to 14,000 ppm ammonia reported as Nitrogen (N).
Ammonia ISE analysis provides a quick measurement, five minutes (at the lowest levels) or less, while providing accuracy comparable to other accepted methods.
The electrode can be used in samples in the temperature range of 0 to 50C.
The measurement is not affected by sample colour or turbidity.
Performing measurements with reproducible, accurate results when measuring low level ammonia samples can be difficult at times.
There are a number of factors that contribute to the rapid, reproducible results when measuring low levels of ammonia.
Previously, proper installation of membranes could be challenging as the user needs to stretch the membrane just right over the electrode body.
This is not the case with the new high performance ammonia electrode.
No stretching of the membrane is needed.
It is just gently placed across the electrode body.
In addition to this, pre-assembled bodies with membranes are available.
These provide much more accurate results than previously designed bonded membrane caps that many manufacturers use.
Both of these factors eliminate one of the major disadvantages of existing ammonia electrodes where membranes can be hard to install or bonded membranes do not provide optimum results.
Ammonia samples must be aqueous and cannot contain organic solvents.
Ionic strength adjustor (ISA) must be added to all samples and standards just prior to measurement.
This will adjust the pH above 11.
Solutions will be blue when using the Orion 951211 ISA.
In this basic solution, all ammonium ions will be converted to ammonia.
There are different techniques available to the analyst when measuring ammonia with an ISE.
Direct measurement is a popular procedure used when measuring a large number of samples.
The system is calibrated using a series of standards.
The concentration of the samples is determined by a single reading that is compared to the standards.
As an additional aid to easier low level measurements, the Orion Star series ISE meters all feature a special calibration mode to improve the measurement accuracy at low levels.
Known addition is an incremental technique that is used to measure ammonia concentration without calibration.
Known addition measures dilute samples by placing the electrode in a sample and adding an aliquot of a standard solution to determine the concentration.
The measurement of ammonia in waste water is an important measurement.
Labs strive to meet the EPA and local regulatory requirements and perform a measurement that is quick, accurate and cost efficient.
Care must be taken in the process to ensure samples are prepared properly and analysed quickly.
With the proper equipment and good laboratory technique, the analyst can be confident of the results they achieve with their ammonia measurement every time.
• Thermo Fisher Scientific: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
