Product category:
Conventional Industrial Liquid flowmeters
News Release from: Titan Enterprises | Subject: 800D
Edited by the Processingtalk Editorial
Team on 17 March 2008
New flowmeter for laboratory and pilot
plants
The Titan 800D digital flowmeter is more cost-effective than the glass tube variable area flowmeter, the conventional first choice for visual liquid flow measurement in the laboratory or pilot plant
More important, the Titan 800D, with integral electronics and a digital flowrate display, provides a flow pulse output as standard, enabling continuous electronic recording of your experimental data The 800D is the latest compact version of the Titan Enterprises range of Pelton wheel liquid flow sensors in the 800/1000 Series: these measure liquid flows over a wide 15:1 range
This article was originally published on Processingtalk on 13 Dec 2005 at 8.00am (UK)
Related stories
The ultimate replacement for liquid VA meters
A new low-cost flowmeter from Titan Enterprises measures the rate of flow in the users chosen units, and can display the total amount of liquid passed since the last reset
Several models are available covering flows between 50mL/min and 15Litres/min, with an inherent linearity of +/- 2% FSD or better, and a repeatability of +/-0.25%.
With a moulded, corrosion resistant body in PVDF engineering plastic, the 800D is DC powered, using any supply from 4.5 to 24VDC.
Titan can supply the unit configured and calibrated to your specification, but the versatile electronics can be configured and re-calibrated as needed on site, using the process fluid, and in the actual on site operating conditions. Request a free brochure from Titan Enterprises ...
• Titan Enterprises: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
