Complete range of ducting inspection components

Edited by the Processingtalk editorial team Oct 11, 2006

Truduct Products has a complete range of stainless steel inspection components for duct systems, including inspection pipes, cleaning pipes, inspection Tee pieces or plexiglass pipes (sight glasses)

Truduct Products has now completed their user friendly range of stainless steel inspection components for your duct system including inspection pipes, cleaning pipes, inspection Tee pieces or plexiglass pipes (sight glasses).

Each component will allow sufficient access for easy inspection or thorough cleaning and can be connected with pull rings to your pipe system.

Access doors of the inspection sections (80mm up to 400mm) and cleaning sections (200mm up to 630mm) are sealed by Neoprene (inspection) or EPDM (cleaning).

The seal is temperature resistant up to 80C.

Other sealing materials are available upon request.

Plexiglass pipes are available from 80mm diameter up to 250mm.

The flanged sockets adapt to any existing stainless steel Truduct component and will be connected with the well known pull rings.

Plexiglass pipes are temperature resistant up to 70C.

Inspection Tee pieces have an open access which can be closed with a rubber cover.

Rubber covers are available in natural rubber, NBR or neoprene from 80mm up to 300mm diameter.

If required the rubber covers can be secured by additional cover locks.

Truduct inspection ducting components are also available in primed mild steel or galvanised upon request.