Product category:
Pumps, Vacuum pumps
News Release from: The Pump Company | Subject: J series
Edited by the Processingtalk Editorial
Team on 12 April 2007
This pump is primed for ''Action''
If you're looking for a pump that can handle air, be capable of a suction lift, pump solids in suspension and be ready to self prime every time - then look no further than the J series
If you're looking for a pump that can handle air, be capable of a suction lift, pump solids in suspension and be ready to self prime every time - then look no further than the J series available from "The Pump Company" This Varisco manufactured self priming pump is equally at home in industry, agriculture, civil engineering or emergency services
This article was originally published on Processingtalk on 12 Feb 2008 at 8.00am (UK)
Related stories
Self-priming pump designed for tough applications
The Varisco J series self priming pump range, now available from the Pump Company, is a pump designed for tough applications
Seal-less chemical pump capable of dry running
Solid answers to fluid questions: One of the biggest problems when using pumps is dry running, up till now: the Pump Company introduces a dry running seal-less chemical pump in thermo-plastic material
Obtain a smoother flow by changing gear pump
When a smooth flow is the priority, when you need to handle thin or thick liquids, the choice of pump is critical: the Varisco 'V' series of Internal Gear Pump is a versatile option
It can pump clean or dirty, neutral or acid/alkali, petrol or solvents, lift out of sumps or gullies used in surface irrigation or pumping effluents.
Do away with the submersible or air pump, this pump sits on the surface with only a pipe going into the liquid So why is it so good?.
* Rapid self priming - Once filled with liquid it will prime up to 7.5m.
* Simple construction - only one moving part, the impeller.
* Open blade impeller - allows passage of solids and easy inspection.
* High resistance to abrasive liquids - replaceable wear plates.
* Externally lubricated mechanical seal - prolongs life and no leaks.
* Easy to install - only the suction pipe goes into the liquid.
* Use it and abuse it! This pump has been designed for operating in harsh environments, with a heavy duty casing in cast iron, bronze or stainless steel.
It also has large inspection cover.
Open impellers are available in ductile iron, aluminium bronze or stainless steel to handle large diameter spherical solids.
The replaceable wear plates arein cast iron, oil or abrasive resistant rubber faced cast iron, bronze or stainless steel.
the externally lubricated mechanical seal can run dry on handle high vacuum even when pumping highly abrasive liquids.
Double or cartridge seals available on request.
Heavy duty bearings suitable for direct or V belt drive.
ATEX certification available.
Special versions include magnetic drive or an engine driven pump.
Flow rates from 5 - 600m3/h.
Where can I get one?.
The answer is The Pump Company, just another example of "Solid Answers to Fluid Questions".
• The Pump Company: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
