Product category:
Pumps, Vacuum pumps
News Release from: The Pump Company | Subject: Varisco J series
Edited by the Processingtalk Editorial
Team on 12 February 2008
Self-priming pump designed for tough
applications
The Varisco J series self priming pump range, now available from the Pump Company, is a pump designed for tough applications
With the benefit of a rapid self priming capability and easy installation, the pump can be located in a dry place with only the suction pipe immersed in the liquid The J series can be found in many industrial applications where it is needed to transfer clean or dirty, neutral, acid or alkali liquids, plus those containing sand, mud, solids in suspension; or clean or dirty low viscosity petroleum products or solvents
This article was originally published on Processingtalk on 16 Oct 2006 at 8.00am (UK)
Related stories
Seal-less chemical pump capable of dry running
Solid answers to fluid questions: One of the biggest problems when using pumps is dry running, up till now: the Pump Company introduces a dry running seal-less chemical pump in thermo-plastic material
Obtain a smoother flow by changing gear pump
When a smooth flow is the priority, when you need to handle thin or thick liquids, the choice of pump is critical: the Varisco 'V' series of Internal Gear Pump is a versatile option
The J series is also used in the treatment of polluted, hot or corrosive waste water or for dosing neutralising liquids.
The range can also be offered to meet ATEX regulations.
This robust pump is constructed in heavy duty cast iron, bronze or stainless steel.
The open impeller design makes it ideal for handling large diameter spherical solids, while the externally lubricated mechanical seal can run dry on high vacuum even when pumping highly abrasive liquids.
The built-in non return valve has a dual function; it prevents the suction pipe from emptying when the pump is off and it retains a sufficient amount of liquid in the pump body to prime the pump.
A heavy duty bearing housing make the pump suitable for direct or V-belt drive with a range of electric motors or engines; either long or close coupled.
With flow rates in excess of 1000 m3/h and heads up to 70 m, the J series is another example of "Solid Answer to Fluid Questions" from The Pump Company Further details are available from our website, or request a brochure from the Pump Company sales office direct.
• The Pump Company: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
