Product category:
QC and QA systems
News Release from: Update Manufacturing (Thailand) Co | Subject: Nextech DTT Series - Version 4D
Edited by the Processingtalk Editorial
Team on 03 March 2004
Digital Torque Testers have improved
features
Update Manufacturing is proud to announce the release of Nextech DTT Series - Version 4D, with new and improved features, like a 'Real Time Clock' and '200 Memory Storage'
Update Manufacturing is proud to announce the release of Nextech DTT Series - Version 4D These Digital Torque Testers have new and improved features, which were not previously available
This article was originally published on Processingtalk on 8 Jul 2003 at 8.00am (UK)
Related stories
New advanced torque tester
Update Manufacturing has released an advanced "Torque Tester" using a fully digital and embedded software system, ideal for setting and calibration of torque tools on either manual or powered tools
New wallchart simplifies IEC61508
August 2004 was the deadline for IEC 61508, the standard focusing on safety-related systems that incorporate electrical, electronic or programmable instruments: this step by step wallchart will help
CD based 'Hazardous Area' training course released
Abhisam Software has just released a new CD based training course on Hazardous Area Instrumentation: this is available as either a stand alone single user license or as a multi-user license
The two main features are 'Real Time Clock' and '200 Memory Storage'.
Memory can now be saved with time and date, so operators will have additional information on when the test was done.
Data can be transferred with time/date, memory data editing, and improved User Interface PC software.
A total of 9 reading units can be adjusted.
The tester has self Auto-Zero function, which can be compensated manually by the user over time if needed.
Other features included Auto-Reset; Go/No-Go (pass/fail) Mode; Peak hold, First Peak, Track Readings; etc These units are carefully calibrated using software setup, so that no electronic or mechanical adjustment is required.
These units have a high data accuracy of 0.2% and the decimal readings can be shifted to match the accuracy of the tools being tested.
It can be used with power tools using a rundown adapter, which is provided in various formats to match your working environment.
Casing of the tester is machined from a solid block of aluminium.
The rechargeable battery allows many hours of uninterrupted use in the production line.
The models that have been released are ranged in 5 Kgf.cm, 10 Kgf.cm, 50 Kgf.cm, 100 Kgf.cm and 200 Kgf.cm.
Self-calibration instruments are also available such as torque balance arms, weight sets, etc More models will be released in the near future.
Each unit comes standard with a battery charger, rundown adapter with spring, memory download software, communication cable, and a strong aluminium carrying case.
• Update Manufacturing (Thailand) Co: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
