Product category:
Potable water metering and distribution
News Release from: Viking Johnson | Subject: EasiClamp 9''
Edited by the Processingtalk Editorial
Team on 29 November 2007
New DN225 pipe repair clamp plugs a gap
In response to customer demand, Viking Johnson has added a DN225 / 9inch size to its range of EasiClamp units for repairing leaks on damaged pipes
The introduction of the new size means that 9inch pipes with working pressures of up to 16bar can now be repaired with EasiClamp instead of stainless steel alternatives, which have a lower pressure rating EasiClamp reduces the need for cut-out repairs on all commonly encountered pipe materials - cast and ductile iron, steel, PVC and asbestos cement
This article was originally published on Processingtalk on 12 Aug 2003 at 8.00am (UK)
Related stories
New bolting system saves time in the trench
MaxiDaptor, the Viking Johnson universal flange adaptor, is now being supplied with Twin-Start bolts so that it can be bolted up faster and with less effort, saving time in the trench
By using the unique Viking Johnson 360-degree 'waffle' gasket it guarantees a quick, first-time seal on leaks caused by circumferential breaks, corrosion holes, impact damage and longitudinal cracks.
In addition, the high-strength clamp body of ductile and/or malleable iron or steel reinforces the pipeline, giving the repair the same strength as the original pipe.
EasiClamp is available in sizes from DN50/2in to DN300/12in; its OD tolerance range of up to 26mm means one clamp will suit the majority of pipe ODs for the same nominal bore.
Self retaining bolts make it easy to install using just a torque wrench, and corrosion protection is provided by Rilsan Nylon 11 on the body and Sheraplex on the nuts and bolts. Request a free brochure from Viking Johnson ...
• Viking Johnson: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
