Visit the Metrohm UK web site
Click on the advert above to visit the company web site

Product category: Pure water: UV and Membrane systems
News Release from: Elga Process Water | Subject: Centra-R 200
Edited by the Processingtalk Editorial Team on 10 March 2006

Gold plating assisted by reverse osmosis
unit

Request your FREE weekly copy of the Processingtalk email newsletter. News about Pure water: UV and Membrane systems and more every issue. Click here for details.

Compact construction, competitive pricing, ease of use and excellent performance are among the benefits of the new Centra-R 200 packaged water purification system

Compact construction, competitive pricing, ease of use and excellent performance are among the benefits of the new Centra-R 200 packaged water purification system which Elga Process Water has recently supplied to IDM Electronics in Reading Installed to replace an older system which had become unreliable and expensive to run, the new unit supplies high purity make-up water, via an existing ring main, to the company's gold-plating plant

The maximum demand is 160 litres of water per hour with a conductivity of 25microS/cm or better.

In addition, it is also necessary to limit bacteria levels to 10 cfu/ml, to avoid bacterial build up in the ring main.

To address these requirements, IDM Electronics chose the Centra-R 200 after carefully considering a range of other options.

The unit, which uses reverse osmosis (RO), was preferred over ion-exchange systems as, unlike those systems, it does not require regeneration.

In addition, the Centra unit is supplied as a complete package measuring only 1820 x 730 x 890mm, which saves valuable space in the IDM Electronics production area.

Despite its small size, the Centra-R 200 incorporates not only an RO membrane, but also a 350 litre reservoir, a recirculation pump, a 0.2micron filter for removal of particulate matter and a composite vent filter to prevent airborne gases entering the reservoir.

The compact enclosure also houses a UV photo-oxidation system to sanitise the product water, which prevents bacterial problems in the ring-main, without the need to install external sanitising equipment.

A multi-function electronic display panel makes it easy to monitor and control the operation of the system, and provides a readout of key parameters, including recirculation flow rate and status, product water quality and reservoir level.

The Centra packaged water treatment systems are delivered to site fully assembled and tested, making installation and commissioning fast and straightforward.

For IDM Electronics, this meant that the loss of production due to the interruption of plating operations during the changeover to the new system was minimised.

"The new system is meeting or exceeding all of our requirements," said Philip Millen of IDM Electronics, "and we're delighted with how little attention it needs.

Unlike our previous ion-exchange installation, the new system needs very little maintenance - just the occasional replacement of consumables, and the manual initiation of the automated disinfection routine".

The Elga Pure Water Centra packaged water purification systems of the type used by IDM Electronics provide a convenient and cost-effective method of supplying high purity water to distribution loops in a wide range of industrial, commercial and laboratory applications.

The units are available with or without an integral UV photo-oxidation unit, and have a maximum loop flow rate of 18 litres per minute.

Elga Process Water: contact details and other news
Email this article to a colleague
Register for the free Processingtalk email newsletter
Processingtalk Home Page

Search the Pro-Talk network of sites

Visit the Metrohm UK web site