Product category:
Weighing systems, Strain gauges
News Release from: Vishay Nobel | Subject: N3500 series load cells
Edited by the Processingtalk Editorial
Team on 01 August 2003
Silo weighing for inventory control
In a move to improve its efficiency, BP Performance Films has recently installed six new silos fitted with weighing systems for inventory control supplied by Vishay Nobel
In a move to improve its efficiency, BP Performance Films has recently installed six new silos fitted with weighing systems for inventory control supplied by Vishay Nobel The silos receive raw material in the form of polyethylene pellets or resin of various grades
This article was originally published on Processingtalk on 13 May 2003 at 8.00am (UK)
Related stories
Silo weighing for inventory control
In a move to improve efficiency, BP Performance Films has recently installed six new silos fitted with weighing systems for inventory control supplied by Vishay Nobel
Load cells on offshore pipe laying vessel
Caley Ocean Systems of Scotland, chosen to design and manufacture a 700 tonne capacity 'Hang-Off' module, approached Vishay Nobel for assistance with the monitoring of the pipe laying hold-back forces
The pellets are extruded into film, which is then further processed on site.
Following this, the film is printed to customer requirements and converted to finished products.
These include bread bags, diaper bags, carrier bags, etc The Vishay Nobel weighing systems have been incorporated into the company inventory management system and have proved to be a cost effective investment.
Further reading
Replacing old technology minimises product loss
Engineers at Muller Dairy decided they needed to replace old technology pressure transmitters with accurate and hygienic pressure transmitters that would withstand an aggressive environment
Elegant economic operator-friendly batch weighing
Familiarity with the extensive capabilities of the PC to provide comprehensive information exchange between man and machine, has led to a rapid rise in expectations from industrial weighing sensors
Weighing for hazardous chemical reactions
Phoenix Chemicals specialises in the safe handling of hazardous reactions using purpose-built continuous and semi-continuous reaction systems, so needs versatile accurate weighinf=g systems
The BP Performance Films group is using one weight output to display the silo contents level and the weight on an HIM type display, configured to display vessel graphics.
The other output, connected to a modem, is use by suppliers for access to the raw materials.
This enables the product level weight values of each silo to be integrated remotely and the new deliveries arranged without the intervention of BP employees.
Previously, this would have meant checking stock levels on a regular basis, checking availability of the product, raising orders and organising delivery schedules.
Each outdoor raw material storage silo is supported on four double-ended N3500 series load cells.
These have been supplied in an all stainless steel construction, making them ideal for outdoor installation.
The double-ended load cell design allows the load cell beam to be supported at each end by the base plate assembly.
The beam is fitted into the support frame/base plate assembly and held in position by loading pins, which are in turn held in place by keep plates.
The beam is loaded in the centre by a load bar to form part of the top plate.
This arrangement is designed to accommodate some installation mis-alignment, which simplifies the installation and saves both time and cost.
The load cell design also incorporates a self-jacking feature, which, when engaged, permits vessel installation with the beam removed.
This can save on the potentially costly replacement of load cells, where welding or mis-handling of the silo can cause shock or fatal overloads.
The four load cells are wired to summation terminals and are fitted inside a locally mounted enclosure, which also includes the AST-3P weight transmitter.
The AST-3P is a DIN rail mounting module, providing both 4-20 mA and RS485 MODBUS outputs.
The transmitter can be set-up locally via the multi-function push buttons and integral display or remotely on a technician's laptop using the Vishay Nobel Delta Com software package.
The AST-3P is a high performance instrument with over eight million internal counts.
Should a unit ever require changing, the existing calibration values can be re-entered (or down loaded).
Since the calibration values are set up so precisely, the system does not require re-calibration.
This effectively means that production down time is kept to an absolute minimum.
The task can be carried out easily by a plant technician, ensuring a speedy return to production.
The module is design to operate from 24V DC, but, in this case, a mains power unit was included to suit the local voltage supply. Request a free brochure from Vishay Nobel ...
• Vishay Nobel: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
