Product category:
Sludge Handling and treatment
News Release from: Watson-Marlow Bredel Pumps | Subject: SPX50
Edited by the Processingtalk Editorial
Team on 07 June 2007
Peristaltic pumps eliminate timers in
desludging
Two Watson-Marlow Bredel SPX50 hose pumps have been installed at Dwr Cymru - the Welsh Water Lavister Waste Water Treatment Works, significantly improving system performance at the site
The pumps were installed during October 2006 and have delivered trouble-free operation since installation, improving sludge consistency Prior to the installation of the SPX50s, auto-desludging of the primary tanks at the site was operated by timer-controlled automatic actuated valves
This article was originally published on Processingtalk on 10 Jun 2008 at 8.00am (UK)
Related stories
Free pump trials for the food processing industry
Peristaltic pumps offer many advantages to the food processing industry: a Free Pump Trial is offered by Watson-Marlow to test our peristaltic pump performance on your plant, in your application
Peristaltic pumps simplify moving apple pie mix
The introduction of hose pumps to an apple pie mixing and food processing plant has made production faster and completely eliminated the need for seals, valves and manual handling of products
Engineers at Lavister, which serves a population of 5500, found the valve technology difficult to control and sludge quality was far from consistent.
"By their very nature, the timer controlled actuated valves opened fully for the set time period resulting in variable sludge consistency.
Either too much water content resulted at the primary sludge holding tank or insufficient desludging resulted in blanket carry over from the primary tanks" said Dave Hughes working on behalf of Dwr Cymru - Welsh Water.
Further reading
Waste clay slurry pumps help cement plant results
Peristaltic pumps were selected to transfer the paste underflow from clay washings thickeners to the cement plant at Buxton Lime Industries (BLI) in Buxton, and have not needed maintenance for 3 years
Peristaltic pumping of whole egg yolks
A hygienic peristaltic pump is being used to pump whole egg yolks and whites through a chilling process before despatch to food manufacturers who make extra-thick omelettes that accompany sushi
Peristaltic pump framework agreement with YWS
Watson-Marlow Bredel has won a five year framework agreement (with a two year option) for the design, supply, installation and commissioning of peristaltic pumps to Yorkshire Water Services (YWS)
"We took the decision to replace the valves with two SPX50 hose pumps, one for each tank - each of which currently produces approximately 7M3 of sludge/day.
The mechanical installation was carried out by Smart Liquid Systems, the electrical by Lloyd Morris Electrical and the civil work by E Jones and Son, all local contractors.
Since installation, the SPX50 pumps have not only required minimal routine maintenance, but have desludged at the specified rate without interruption to flow or 'rat-holing' ".
The hose pumps installed at Lavister handle 3-5% dry solids content primary sludge at a transfer rate of 2500 litres/hr.
Each pump runs at 16 RPM and has a discharge pressure of less than 5 bar.
They are also fitted with WIMES Efficiency1 1.5kW cast iron frame motors with fixed speed gearboxes.
The pumps were installed complete with associated pipework and valves, and are fitted with automatic cut-out switches to protect against blockages in the suction or discharge lines and burst hose protection.
Suction and delivery lines are also fitted with surge dampers.
The success of the pumps on abrasive sewage sludge pumping, and other similar applications, stems from a combination of the gentle peristaltic pumping action, low operating speeds, and the abrasion resistant characteristics of the hose itself.
Designed to deliver continuous flow rates of up to 5,000 l/h and pressures up to 16 bar, the Watson-Marlow Bredel SPX50 hose pump is ideally suited for auto-desludging applications.
Its composite, braided nylon reinforced hose element is designed to handle sewage sludge as well as other viscous, fibrous and abrasive materials.
It also incorporates a patented internal reinforcing element for enhanced mechanical strength, and its elasticity is maintained by passing it continually through a bath of lubricant.
The SPX design allows rapid hose changing when required, as well as simple maintenance.
The pumps also feature overload protection, and enhanced corrosion resistance.
The ability to achieve and maintain accuracy to within +/-1% and to handle additives such as lime slurry and easily damaged filamentous flocculants, has led to the widespread adoption of the pump for dosing duties in sewage and water treatment processes. Request a free brochure from Watson-Marlow Bredel Pumps ...
• Watson-Marlow Bredel Pumps: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
