Product category:
Trade effluent monitoring + on-site treatment
News Release from: Watson-Marlow Bredel Pumps | Subject: Siltbuster
Edited by the Processingtalk Editorial
Team on 08 June 2007
Peristaltic pumps the clear choice at
Siltbusters
Separating suspended solids from liquids before discharging to sewer or water course is a headache that construction companies have had to endure for a considerable period of time.
Aggravating the problem further is when materials won't settle quickly To overcome this obstacle Monmouth-based Siltbuster has standardised on innovative 500 and 600series peristaltic pump technology from Watson-Marlow Bredel, ensuring that construction projects can continue without delay whilst meeting stricter environmental standards
This article was originally published on Processingtalk on 10 Jun 2008 at 8.00am (UK)
Related stories
Free pump trials for the food processing industry
Peristaltic pumps offer many advantages to the food processing industry: a Free Pump Trial is offered by Watson-Marlow to test our peristaltic pump performance on your plant, in your application
Peristaltic pumps simplify moving apple pie mix
The introduction of hose pumps to an apple pie mixing and food processing plant has made production faster and completely eliminated the need for seals, valves and manual handling of products
Established in 2000, Siltbuster has grown quickly to become the UK's leading designer and manufacturer of mobile silt management equipment.
Today the company has in excess of 60 silt pollution prevention projects ongoing at any one time, as far afield as the Orkney Isles and New South Wales, Australia.
The company's core product, Siltbuster, is a range of liquid/solid separation devices designed for temporary use on construction sites to remove suspended solids/oil from water pumped from holes, excavations or surface run-off.
Further reading
Waste clay slurry pumps help cement plant results
Peristaltic pumps were selected to transfer the paste underflow from clay washings thickeners to the cement plant at Buxton Lime Industries (BLI) in Buxton, and have not needed maintenance for 3 years
Peristaltic pumping of whole egg yolks
A hygienic peristaltic pump is being used to pump whole egg yolks and whites through a chilling process before despatch to food manufacturers who make extra-thick omelettes that accompany sushi
Peristaltic pump framework agreement with YWS
Watson-Marlow Bredel has won a five year framework agreement (with a two year option) for the design, supply, installation and commissioning of peristaltic pumps to Yorkshire Water Services (YWS)
The Siltbuster units have been developed to meet the increasing need to improve the environmental protection of water courses, groundwater and marine environments, and the process is now considered best practice for the management of dirty water pumped from construction sites.
However, it is not all plain sailing, as Siltbuster managing director Dr Richard Coulton explains: "Unfortunately we are never entirely sure what we are treating until we see it.
On some jobs fine particles settle extremely slowly or not at all - so we have to help them settle faster via chemical conditioning techniques such as flocculation, coagulation or pH adjustment.
We use Watson-Marlow Bredel 500 and 600 series peristaltic pumps to help facilitate this process".
Siltbuster previously used diaphragm pumps for chemical addition, but grit blocking the valves was a continual problem.
"When this happened we would have numerous construction workers sitting around playing cards, as well as idle plant," says Dr Coulton.
"Downtime in the construction industry is costly and we couldn't afford any more pump failures, so we looked for an alternative pump type.
The Watson-Marlow Bredel pumps appeared robust, reliable and importantly, foolproof.
As mobile units, the Siltbuster systems need to be maintained on-site by construction workers who are perhaps not familiar with water treatment technology".
In Watson-Marlow Bredel peristaltic pumps, nothing but the tube touches the fluid, eliminating the risk of the pump contaminating the fluid or the fluid contaminating the pump.
Fluid is drawn into the pumphead and trapped between the rollers and the track.
As the next roller moves forward, the pocket of fluid is expelled and more is drawn in to the tube by the vacuum that is created.
The complete closure of the tube gives the pump its positive displacement action, preventing backflow and eliminating the need for check-valves when the pump is not running.
The pumps, which often run 24/7, are ideal for slurries, viscous, shear-sensitive and aggressive fluids, and are easy to install, simple to operate and inexpensive to maintain.
"We have now standardised on Watson-Marlow Bredel pumps," says Dr Coulton: "I think we have bought around 30 units to date (the pumps are integrated by Siltbuster into its dosing and pH systems) and to date have had very few problems".
The Siltbuster process, in contrast to conventional settlement tanks, stills the incoming water/solids mix and routes it upwards between a set of inclined plates for separation.
Fine particles settle on to the plates and slide down to the base for collection, while treated water flows to an outlet weir after passing below a scum board to retain any floating material.
The inclined plates dramatically increase the effective settling area of the unit, resulting in a smaller space requirement on-site and a process that unlike lagoons, is unaffected by wind disturbance.
For further information on Watson-Marlow Bredel peristaltic pumps, please use the Processingtalk reader response service. Request a free brochure from Watson-Marlow Bredel Pumps ...
• Watson-Marlow Bredel Pumps: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
