Product category:
Plant Inspection and Cleaning
News Release from: Wheelabrator Group | Subject: R3d (V) Euro Tumblast
Edited by the Processingtalk Editorial
Team on 01 December 2005
Decommissioning surface blasting
opportunity
World leading surface preparation and finishing specialist Wheelabrator has been awarded a contract to supply equipment for decontaminating materials at one of Europe's nuclear facilities
World leading surface preparation and finishing specialist Wheelabrator has been awarded a contract to supply equipment for decontaminating materials at one of Europe's nuclear facilities The company will supply a GBP350,000 abrasive blasting unit on behalf of customer RWE Nukem to the European Commission Joint Research Centre (JRC) in Ispra, Italy
This article was originally published on Processingtalk on 10 Nov 2005 at 8.00am (UK)
Related stories
Revving up production manufacturing turbochargers
The Wheelabrator Group has provided a range of new surface preparation and finishing equipment at the turbocharger manufacturer and reconditioner, Holset Engineering
Clean parts where others cannot reach
Surface preparation experts Wheelabrator Group are hoping to clean up by launching a new range of aqueous machines designed for metal part washing, degreasing and drying in small to medium batches
A Wheelabrator R3d (V) Euro Tumblast machine, traditionally used in heavy duty metal foundries, will be used to decontaminate metal components and concrete blocks as part of the JRC-Ispra extensive decommissioning programme.
Slightly contaminated material is produced when active nuclear facilities are decommissioned at the end of their useful life.
Demolition of buildings creates large amounts of components, such as bricks, stone, steel and other structural material, considered to contain low levels of radioactivity within the surface layer.
Further reading
New SmartLine range of surface blasting equipment
Surface preparation and finishing equipment specialist Wheelabrator Group is hoping to blast away the competition by launching a new range of economically priced, entry level machines.
New shot blasting plant for surface preparation
Market leading construction equipment manufacturer Thwaites has laid the foundations for further success by investing in a new shot blasting plant for surface preparation
Deburring machine for milk processing
Pioneering milking machine manufacturer Fullwood is creaming off the benefits of the latest technology with a new machine from market leading surface preparation experts Wheelabrator Group
Phil Smith, senior project manager at nuclear engineering specialist RWE Nukem, said: "JRC Ispra has initiated a programme to reduce costs and minimise radioactive waste quantities, a major component of which is the decontamination of materials to clearance levels suitable for unconditional release in line with EU directives".
Custom built at the Wheelabrator Group manufacturing facility in Ossett, near Wakefield, design modifications were required to the R3d (V) machine to fit the low headroom at its new home and enhance its safety features.
A team of seven people from Wheelabrator worked in conjunction with engineers from Warrington-based RWE and JRC Ispra to tailor the machine.
Mr Smith said: "The team at Wheelabrator have been very helpful.
Projects such as these are never easy, but our good working relationship has allowed us to tackle the challenges presented together and develop solutions to solve these.
The nuclear sector is one of the world's most demanding industries with highly detailed specifications and exacting requirements".
Located in Area 40 at the Ispra site, the unit will replace the old and obsolete chemical baths.
A secondary containment wall and airlock will be added to the room to reduce noise levels and aid contamination control.
With a 700 litre capacity, material to be processed in the machine will be sealed in 220 litre drums and transferred to the machine via a hydraulic loader.
Operators will key in commands via a touch screen console located safely outside the secondary containment wall.
The main chamber is equipped with two Ezefit blast wheels, each with six blades and driven by a direct couple motor, which propels the sharp steel grit onto the contaminated components, removing the surface layer including any contamination.
A heavy duty steel slatted mill creates a continuous tumbling action to ensure complete coverage of the components in one cycle.
Typically 30 minutes will remove contamination from metal components to below required clearance levels whilst 10 minutes will be sufficient for concrete.
Cleaned off contaminants will be fed to collection bins and the dust created bagged in secure waste drums.
These can then be disposed of in accordance with the relevant legislation.
The steel grit will be recycled within the machine via an airwash separator with a second magnetic particle separator and cleaned air returned to the room after passing through primary filters and an additional TROX air conditioner.
Lawson Pryke, technical director at Wheelabrator Group, said: "This abrasive blasting decontamination technique can be used to effectively reduce the amount of radioactive waste apparent with larger quantities of contaminated materials.
The process produces fully decontaminated materials suitable for release, leaving a small amount of contaminated material in the form of dust, fines and paint residue, with reduced requirements for treatment and disposal".
A four-day training course will be provided on-site to all employees who will operate the machine.
Installation, proving, spares and service will be supplied by the group aftersales specialists, Wheelabrator Plus.
In 1996 the Wheelabrator Group demonstrated the effectiveness of using abrasive blasting as a decontamination technique at Belgoprocess in Belgium.
Alternative waste and material management routes such as supercompaction and disposal are typically three times more expensive than dry abrasive blasting.
Mr Pryke said: "Abrasive blasting machines offer huge economic benefits and have added environmental advantages by effectively reducing slightly contaminated material to a state which allows disposal with no negative side effects.
A large amount of material can also be released for recycling".
JRC-Ispra opened in the early 1960s as part of a network of research centres located in different member states set up to provide customer-driven scientific and technical support for European Union policies, linking industry, universities and institutions as well as carrying out studies and experiments.
Contributing to the establishment and growth of nuclear power related industries, the Ispra site undertook research into reactor development and the fuel cycle.
As the research progressed, a variety of additional experimental facilities, including reactors, hot cells, radiochemical plants and waste management stores were built.
Since the early 1980s, the European Commission has progressively reduced its focus on nuclear research and development at Ispra, instead expanding activity into food safety, genetically modified organisms, chemicals and the environment.
Mr Smith said: "With the global move away from nuclear facilities, the industry is faced with a large stock of potentially contaminated buildings and equipment.
The need to comply with legislation governing decommissioning has driven the nuclear industry to review wider applications in the search for a solution".
Market leader in supplying this kind of service to the nuclear industry, its involvement extending over 20 years, the Wheelabrator Group supplies standard and bespoke machines costing from about GBP150,000 upwards.
The group has a long established relationship with the nuclear industry, its machines can be found in Sellafield in Cumbria, Capenhurst in Cheshire and Winfrith in Dorset. Request a free brochure from Wheelabrator Group ...
• Wheelabrator Group: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
