Product category:
Oil, Gas, Petrochemical Industry News
News Release from: Wilks Enterprise | Subject: InfraCal TOG/TPH
Edited by the Processingtalk Editorial
Team on 06 November 2006
Oil-in-water measurements on site
Oil-in-water measurements on off-shore platforms, in refineries or wastewater treatment facilities with easy-to-use, portable infrared analysers
The InfraCal TOG/TPH Analysers, manufactured by Wilks Enterprise were specifically designed for easy, on-site infrared analysis of total oil and grease (TOG) and total petroleum hydrocarbon (TPH) concentration levels in produced water on off-shore platforms or wastewater in refineries or treatment facilities Typical analysis time is under 15 minutes, including extraction
This article was originally published on Processingtalk on 18 Feb 2008 at 8.00am (UK)
Related stories
Checking the cleaning of metal parts using IR
The Wilks Enterprise InfraCal TOG/TPH Analyser can be used to test the solvent where metal parts to be tested are soaked, to confirm no grease has been found
IR analysers measure fats, oils and greases (FOG)
Wilks Enterprise portable IR Analysers provide an accurate, easy on-site analysis to assist regulators, as well as industry, reduce the build up of fats, oils, and greases (FOG) in sewers
InfraCal TOG/TPH models are available for use with a wide variety of extracting solvents such as hexane, pentane, Vertrel MCA, Freon, hydrocarbon-free grade of perchloroethylene, S-316 or AK-225.
When using solvents that contain hydrocarbons (i.e hexane and Vertrel MCA), the InfraCal Model HATR-T2 is the recommended analyser.
When using an infrared transparent solvent, the InfraCal Model CVH with a 10mm quarts cuvette cell is the usual instrument of choice.
All InfraCal analysers are portable (operable from a 12 volt dc power supply) and weigh less than 5 lbs.
Their compact, rugged design has no moving parts requiring alignment or adjustment and are ideal for use on offshore oil platforms or in refineries or treatment facilities for monitoring wastewater effluents.
Pushbutton, user-friendly operation makes them easy to use with minimal training.
The analysers can read out in infrared absorption values or they can be calibrated to display concentrations directly in any desired format such as ppm or milligram/kg.
A wide range of accessories, such as printer and carrying case increase the versatility and capabilities of the InfraCal TOG/TPH Analyser. Request a free brochure from Wilks Enterprise ...
• Wilks Enterprise: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
