Product category:
Gas monitoring and analysis
News Release from: Witt Gas Techniques | Subject: MG500-2ME
Edited by the Processingtalk Editorial
Team on 13 July 2006
Gas mixer helps clean steelworks gas
injectors
A gas mixing system with an integrated O2 analyser and receiver has been applied to steelworks injector cleaning, to determine the optimal oxygen percentage for the cleaning processes used
The Witt Gas MG500-2ME gas mixing system used with an integrated O2 analyser and receiver, can be used by steelworks, when cleaning pipework to determine the optimal oxygen percentage for the differing cleaning processes that are used This mixer has a capacity range from 0 - approximately 270Nm3/hour and is easy to operate with a control knob and % scale providing infinitely variable mixture settings
This article was originally published on Processingtalk on 17 Mar 2003 at 8.00am (UK)
Related stories
Oxygen analyser takes mini samples
Witt Gas Techniques, the Warrington based gas safety, control, mixing and analysis equipment supplier, has launched Oxybaby V a hand held system for 02 analysis in the food packaging industry
New non-destructive leak tester for packaging
Witt Gas Techniques has introduced a new system for non-destructive testing for leaks in individual flexible and rigid food and pharmaceutical packaging based on CO2 detection technology
It has a +/- 1% setting accuracy.
During steel production, argon and nitrogen are added to the liquid steel to achieve the best possible mix.
An after effect of this process is that the pipework often clogs up and the gas supply is cut off, therefore regular cleaning becomes essential.
Compressed air is mainly used to clean the pipework of the converters in the steel production process.
The results of this cleaning can be improved by using higher proportions of oxygen in the compressed air.
However a note of caution is added, too much oxygen and the mix could detonate, too low a percentage not all the contaminations can be burnt away.
Around 30% of oxygen in the nitrogen produces the best results.
The MG500-2ME gas mixer ensures that the correct control and volume of oxygen is used.
An EEx version for flammable gases using a separate control cabinet is available as an option, monitoring of the gas supply is an option using pressure switches; if the inlet pressure becomes too low, an optical or audible alarm is triggered and the machinery being monitored is shut down reducing risk of any problems occurring.
Also available is an integrated gas analysis for monitoring, control and documenting the gas mixture.
The MG500-2ME gas mixing system is available from Witt Gas Techniques, the Warrington based gas safety, control, mixing and analysis equipment supplier.
• Witt Gas Techniques: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
