Product category:
Couplings, Seals, Gaskets
News Release from: Meco Shaft Seals | Subject: Meco "EAS"
Edited by the Processingtalk Editorial
Team on 26 March 2003
Meco split shaft seals for dry powder
applications
The Meco original "EAS" externally-adjustable fully-split seals offer complete containment of dry, abrasive powders, pastes, slurries, corrosives and fluids on a wide variety of rotating equipment
Meco seals perform where traditional packings fail to seal The patented Meco concept is based on the use of a driving elastomer; there are no internal springs to loosen, corrode or break
This article was originally published on Processingtalk on 30 Apr 2003 at 8.00am (UK)
Related stories
Split shaft seals for dry process applications
The Meco "EAS" externally-adjustable seals offer complete containment of dry, abrasive powders, pastes, slurries, corrosives and fluids on rotating equipment, where traditional packings fail to seal
The seal face pressures are fully-adjustable with no disassembly.
Since the self-compensating driving elastomer is the only interface with the shaft, the EAS seal will accommodate significant radial and angular shaft misalignment and shock loads, as well as thermal growth in high-temperature process machinery.
The EAS is custom-designed and manufactured to each application, and can retrofit most process equipment such as blenders, screw conveyors, bucket elevators, dryers, mills, agitators, extruders, etc.
Meco incorporates 1/4 inches of total runout/misalignment capacity into EAS seal designs.
Where needed, more runout capacity can be provided; even bent shafts can be accommodated without expensive reshafting.
Unlike traditional mechanical seals, Meco seal faces are soft, fault-tolerant and almost impossible to break. Request a free brochure from Meco Shaft Seals ...
• Meco Shaft Seals: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
