Product category:
Gas monitoring and analysis
News Release from: Yokogawa Europe - Industrial Automation | Subject: TruePeak TDL
Edited by the Processingtalk Editorial
Team on 01 June 2007
TruePeak tunable diode laser for site
gas analysis
The Yokogawa TruePeak tunable diode laser analyser for gas measurement in harsh environments provides fast, accurate measurements of O2, CO, CO2 and moisture, in situ
The new Yokogawa TruePeak tunable diode laser (TDL) analyser is designed to make fast, accurate measurements on near-infrared absorbing gases in harsh process environments It is ideally suited to in situ analysis, particularly for measurements in environments involving changing pressure or temperature
This article was originally published on Processingtalk on 25 Jul 2008 at 8.00am (UK)
Related stories
Yokogawa FGD project for Romanian power plant
A Yokogawa consortium will supply electrical equipment and instrumentation for the flue gas desulphurisation systems at the Turceni thermal power plant, Romania's largest power station
Yokogawa strategic partnership with Gazprom Neft
Yokogawa Electric Corporation has signed a strategic partnership agreement with JSC Gazprom Neft, a major oil production and refining company in Russia
It can operate with process pressures up to 20 bar absolute and process temperature up to 1500C, has a fast response (from 1 to 20 seconds), and is interference-free for most applications.
The TruePeak analyser operates by measuring the amount of a laser light that is absorbed as it travels through the gas being measured.
Involving no sensor contact with the process and no moving parts, it leads to a high MTBF and hence a low cost of ownership.
Further reading
A world first: a Foundation fieldbus device DTM
Yokogawa Electric announces that its DPharp EJA V2.5 Device Type Manager (DTM) has been certified for Foundation fieldbus by the FDT Group, a World first
Yokogawa releases enhanced version of Stardom
The new enhanced version of the Stardom network-based control system complies with US gas industry standards and provides a new data-logging function for the FCN/FCJ autonomous controllers
Enhanced version of ProSafe-RS SIS released
The new version of the ProSafe-RS Safety Instrumented System is integrated with the latest Yokogawa production control system, CentumVP, offering improved security and support for Windows Vista
It offers a range of flexible installation options, and features on-board diagnostics.
Using a tunable diode laser as a monochromatic light source offers the benefits of sensitivity, selectivity to resolve single absorption lines, and power - to overcome the effects of optically thick environments with high particulate loading.
The new instrument is one of the most robust process analysers available.
In addition to operating in conditions of high temperature or pressure, it can be used under difficult conditions including environments involving corrosive, aggressive and high particulate content materials.
The TruePeak TDL analyser forms a complementary solution to the Yokogawa ZR Zirconia oxygen analyser, and measures oxygen (O2) with process temperatures as high as 1500C and pressures as high as 20bar absolute.
Measurement span is typically between 1% and 100% oxygen.
Carbon monoxide (CO), from low ppm detection limits to percentage levels, and carbon dioxide (CO2) can also be measured at process temperatures of up to 1500C.
The analyser can also be used for measuring parts per million moisture content in corrosive and aggressive process streams including chlorine and hydrocarbons.
The ability of the new instrument to carry out accurate online process measurements makes it ideally suited to applications such as combustion control, where it can be used to optimise the combustion process by measuring excess oxygen and carbon monoxide on a precise and continuous basis.
It also allows carbon monoxide to be accurately measured on a continuous basis at low ppm levels so that air fuel ratios can be precisely and continually optimised.
Other potential applications include the monitoring of carbon monoxide, methane and moisture to enable burner flame-out and process tube leaks to be identified; the measurement of oxygen on flare lines, alkylation units and gas plants; the monitoring of carbon monoxide and oxygen on fluid catalytic cracking units for safety and catalyst regeneration; or the detection of low ppm concentrations of water in hydrocarbons in catalytic reforming processes.
The TruePeak analyser is a compact stand-alone unit with a built-in 4 x 20 vacuum fluorescent display for scrolling information and a 7-inch colour screen with keypad.
The instrument offers a range of interfaces including Ethernet, USB and wired or wireless PDA communication for safe or hazardous areas.
The instrument includes three configurable 4-20 mA outputs, two 4-20 mA in case of temperature and pressure compensation, and relay outputs including warning/fault relays and valve control.
The analyser is CE marked and ATEX approved for Zone 1 or 2 installations with purge system.
The new TruePeak tunable diode laser (TDL) analyser is manufactured by Analytical Specialties Inc, and has been tested in harsh conditions by Dow Chemicals.
• Yokogawa Europe - Industrial Automation: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
